this is how i configured the modem thingy group = modems id = moto name = "Motorola" #detect-string = "Motorola" #keepalive-cmd = "AT+CMGL" #init-string = "AT+CNMI=1,2,0,1,0"
but i am getting the following 009-12-11 14:52:37 [11527] [0] INFO: Kannel bearerbox II version 1.4.3 starting 2009-12-11 14:52:37 [11527] [0] INFO: MAIN: Start-up done, entering mainloop 2009-12-11 14:52:37 [11527] [0] DEBUG: AT2[SMSC]: start called 2009-12-11 14:52:37 [11527] [6] DEBUG: AT2[SMSC]: device opened. Telnet mode = 0 2009-12-11 14:52:37 [11527] [6] DEBUG: AT2[SMSC]: device opened 2009-12-11 14:52:37 [11527] [6] INFO: AT2[SMSC]: Logging in 2009-12-11 14:52:37 [11527] [6] INFO: AT2[SMSC]: init device 2009-12-11 14:52:37 [11527] [6] INFO: AT2[SMSC]: speed set to 9600 2009-12-11 14:52:37 [11527] [6] DEBUG: AT2[SMSC]: --> ATZ^M 2009-12-11 14:52:37 [11527] [6] DEBUG: AT2[SMSC]: <-- ATZ 2009-12-11 14:52:37 [11527] [6] DEBUG: AT2[SMSC]: <-- OK 2009-12-11 14:52:37 [11527] [6] DEBUG: AT2[SMSC]: --> AT^M 2009-12-11 14:52:37 [11527] [6] DEBUG: AT2[SMSC]: <-- OK 2009-12-11 14:52:37 [11527] [6] DEBUG: AT2[SMSC]: --> AT&F^M 2009-12-11 14:52:37 [11527] [6] DEBUG: AT2[SMSC]: <-- OK 2009-12-11 14:52:37 [11527] [6] DEBUG: AT2[SMSC]: --> ATE0^M 2009-12-11 14:52:37 [11527] [6] DEBUG: AT2[SMSC]: <-- OK 2009-12-11 14:52:37 [11527] [6] DEBUG: AT2[SMSC]: --> AT+IFC=2,2^M *2009-12-11 14:52:37 [11527] [6] DEBUG: AT2[SMSC]: <-- ERROR 2009-12-11 14:52:37 [11527] [6] ERROR: AT2[SMSC]: Generic error: ERROR 2009-12-11 14:52:37 [11527] [6] INFO: AT2[SMSC]: cannot enable hardware handshake* 2009-12-11 14:52:37 [11527] [6] DEBUG: AT2[SMSC]: --> AT+CPIN?^M 2009-12-11 14:52:38 [11527] [6] DEBUG: AT2[SMSC]: <-- +CPIN: READY 2009-12-11 14:52:38 [11527] [6] DEBUG: AT2[SMSC]: <-- OK 2009-12-11 14:52:38 [11527] [6] DEBUG: AT2[SMSC]: --> AT+CMGF=0^M 2009-12-11 14:52:38 [11527] [6] DEBUG: AT2[SMSC]: <-- OK 2009-12-11 14:52:38 [11527] [6] DEBUG: AT2[SMSC]: --> AT+CSMS=?^M 2009-12-11 14:52:38 [11527] [6] DEBUG: AT2[SMSC]: <-- +CSMS: 128 2009-12-11 14:52:38 [11527] [6] DEBUG: AT2[SMSC]: <-- OK 2009-12-11 14:52:38 [11527] [6] DEBUG: AT2[SMSC]: --> AT+CNMI=1,2,0,1,0^M 2*009-12-11 14:52:38 [11527] [6] DEBUG: AT2[SMSC]: <-- +CMS ERROR: 513 2009-12-11 14:52:38 [11527] [6] ERROR: AT2[SMSC]: CMS ERROR: +CMS ERROR: 513 2009-12-11 14:52:38 [11527] [6] ERROR: AT2[SMSC]: CMS ERROR: Error number unknown. Ask google and add it. (513) 2009-12-11 14:52:38 [11527] [6] ERROR: AT2[SMSC]: Initialization of device failed.* 2009-12-11 14:52:38 [11527] [6] INFO: AT2[SMSC]: Closing device 2009-12-11 14:52:38 [11527] [6] ERROR: AT2[SMSC]: Couldn't connect (retrying in 10 seconds). 2009/12/11 Nikos Balkanas <[email protected]> > OK. Seems your modem is working. Configure it for /dev/ttyACM0. > Read how-to in User's Guide. > > BR, > Nikos > > ----- Original Message ----- > *From:* Rajeev Agarwal <[email protected]> > *To:* Nikos Balkanas <[email protected]> > *Cc:* [email protected] > *Sent:* Friday, December 11, 2009 11:06 AM > *Subject:* Re: Sony Ericsson for Kannel > > After installing wvdial i get the following > > > raj...@insi:~/Desktop$ <raj...@insi:%7E/Desktop$> wvdial > --> WvDial: Internet dialer version 1.60 > --> Cannot get information for serial port. > --> Initializing modem. > --> Sending: ATZ > ATZ > OK > --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 > OK > --> Modem initialized. > --> Configuration does not specify a valid phone number. > --> Configuration does not specify a valid login name. > --> Configuration does not specify a valid password. > raj...@insi:~/Desktop$ > > > 2009/12/11 Nikos Balkanas <[email protected]> > >> Hi, >> >> What is cdc_acm? It doesn't look like a modem. What do you have connected >> to your PC? >> >> Next step is to use minicom or wvdial and connect to /dev/ttyACM0. In >> minicom issue an AT command. It should reply with an AT. >> >> BR, >> Nikos >> >> ----- Original Message ----- >> *From:* Rajeev Agarwal <[email protected]> >> *To:* Nikos Balkanas <[email protected]> >> *Cc:* [email protected] >> *Sent:* Friday, December 11, 2009 10:41 AM >> *Subject:* Re: Sony Ericsson for Kannel >> >> hi! >> >> after dmesg | grep tty i got the following >> >> [ 0.004000] console [tty0] enabled >> [ 1.276807] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A >> [ 1.277100] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A >> [10283.432323] cdc_acm 8-2:1.0: ttyACM0: USB ACM device >> [10387.225333] cdc_acm 8-1:1.0: ttyACM0: USB ACM device >> [10570.342537] cdc_acm 8-2:1.0: ttyACM0: USB ACM device >> >> >> how do i decode the above stuff??? >> >> 2009/12/11 Nikos Balkanas <[email protected]> >> >>> Hi, >>> >>> If it is not a modem you cannot use it as an SMSc. And without an SMSc >>> you cannot send/receive SMS. >>> >>> As Isaac suggested, with your modem connected to your server, after >>> rebooting, do: >>> >>> >>> If you don't get anything, your mobile is not a modem, and you cannot use >>> it. To send/receive SMS you will have to either get an SMSc connection or >>> get a GPRS modem. >>> >>> BR, >>> Nikos >>> >>> ----- Original Message ----- >>> *From:* Rajeev Agarwal <[email protected]> >>> *To:* Nikos Balkanas <[email protected]> >>> *Cc:* [email protected] >>> *Sent:* Friday, December 11, 2009 10:22 AM >>> *Subject:* Re: Sony Ericsson for Kannel >>> >>> hi >>> yes the mobile does have a USB port. >>> >>> If it is not modem should i remove the modem details from the conf file? >>> >>> btw have a look at this >>> >>> raj...@insi:~/Desktop$ <raj...@insi:%7E/Desktop$> ls -lrt /dev/ttyA* >>> crw-rw---- 1 root dialout 166, 0 2009-12-11 12:44 /dev/ttyACM0 >>> >>> >>> 2009/12/11 Nikos Balkanas <[email protected]> >>> >>>> Hi, >>>> >>>> If the mobile is not detected by the OS, you won't need an init string. >>>> Simply put the mobile is not a modem. >>>> >>>> Does the mobile feature a USB or serial port? >>>> >>>> BR, >>>> Nikos >>>> >>>> ----- Original Message ----- >>>> *From:* Rajeev Agarwal <[email protected]> >>>> *To:* Isaac Sanni-Thomas <[email protected]> >>>> *Cc:* [email protected] >>>> *Sent:* Friday, December 11, 2009 9:25 AM >>>> *Subject:* Re: Sony Ericsson for Kannel >>>> >>>> that ain't working! >>>> >>>> how to i get the init string? >>>> >>>> 2009/12/11 Isaac Sanni-Thomas <[email protected]> >>>> >>>>> >>>>> >>>>> On 12/11/2009 05:45 AM, Rajeev Agarwal wrote: >>>>> >>>>>> Hi! >>>>>> >>>>>> I was wondering is it possible to use a Sony Ericsson W 580i phone as >>>>>> a >>>>>> modem for sending sms? >>>>>> >>>>>> >>>>>> I havent used a Sony Ericsson but rather a Nokia. >>>>> However you can setup the modem group and smsc group as shown in the >>>>> user guide. >>>>> To be sure the phone can be used, do this: >>>>> Connect the phone to the computer and as root do this >>>>> r...@your-computer#dmesg|grep -i "Sony" >>>>> r...@your-computer#tail -n30 /var/log/messages|grep -i "Sony" >>>>> >>>>> You must see a link to the device file /dev/ttyACM0 or something >>>>> similar which shows connection to your phone. >>>>> Configure kannel accordingly to use the device file that points to your >>>>> phone. Read the user manual on configuring group=modems group=smsc for >>>>> using >>>>> phones as virtual smsc. >>>>> >>>>>> Regards >>>>>> >>>>>> Rajeev. >>>>>> >>>>>> >>>>> >>>> >>> >> >
