On 7/10/07 11:08 AM, "Glenn Carver" <glenn.car...@atm.ch.cam.ac.uk> wrote:
> Hi,
>
> I'd be grateful if someone could explain the meaning of this error
> message to me and whether it indicates a hardware problem or
> application software issue:
>
> [node2:11881] OOB: Connection to HNP lost
> [node1:09876] OOB: Connection to HNP lost
This message is nothing to be concerned about - all it indicates is that
mpirun exited before our daemon on your backend nodes did. It's relatively
harmless and probably should be eliminated in some future version (except
when developers are running in debug mode).
The message can appear when the timing changes between front and backend
nodes. What happens is:
1. mpirun detects that your processes have all completed. It then orders the
shutdown of the daemons on your backend nodes.
2. each daemon does an orderly shutdown. Just before it terminates, it tells
mpirun that it is done cleaning up and is about to exit
3. when mpirun hears that all daemons are done cleaning up, it exits itself.
This is where the timing issue comes into play - if mpirun exits before the
daemon, then you get that error message as the daemon is terminating.
So it's all a question of whether mpirun completes the last few steps to
exit before the daemons do. In most cases, the daemons complete first as
they have less to do. Sometimes, mpirun manages to get out first, and you
get the message.
I doubt it has anything to do with your hardware issues. Personally, I would
just ignore the message - I'll see it gets removed in later releases to
avoid unnecessary confusion.
Hope that helps
Ralph
>
> I have a small cluster which until last week was just fine.
> Unfortunately we were hit by a sudden power dip which brought the
> cluster down and did significant damage to other servers (blew power
> supplies and disk). Although the cluster machines and the Infiniband
> link is up and running jobs I am now getting these errors in user
> applications which we've never had before.
>
> The system messages file reports (for node2):
> Jul 5 12:08:28 node1 genunix: [ID 408789 kern.notice] NOTICE:
> tavor0: fault cleared external to device; service available
> Jul 5 12:08:28 node1 genunix: [ID 451854 kern.notice] NOTICE:
> tavor0: port 1 up
> Jul 7 16:18:32 node1 genunix: [ID 408114 kern.info]
> /pci@1,0/pci1022,7450@2/pci15b3,5a46@1/pci15b3,5a44@0 (tavor0) online
> Jul 7 16:18:32 node1 ib: [ID 842868 kern.info] IB device: daplt@0, daplt0
> Jul 7 16:18:32 node1 genunix: [ID 936769 kern.info] daplt0 is /ib/daplt@0
> Jul 7 16:18:32 node1 genunix: [ID 408114 kern.info] /ib/daplt@0
> (daplt0) online
> Jul 7 16:18:32 node1 genunix: [ID 834635 kern.info] /ib/daplt@0
> (daplt0) multipath status: degraded, path
> /pci@1,0/pci1022,7450@2/pci15
> b3,5a46@1/pci15b3,5a44@0 (tavor0) to target address: daplt,0 is
> online Load balancing: round-robin
>
> I wonder if this messages are indicative of a hardware problem,
> possibly on the Infiniband switch or the host adapters on the cluster
> machines. The cluster software has not been altered but there have
> been small changes to the application codes. But I want to rule out
> hardware issues because of the power dip first.
>
> Anyone seen this message before and know whether to investigate
> hardware first? I did check the archives but it didn't help. More
> info provided below.
>
> Any help appreciate, thanks.
>
> Glenn
>
> --
> Details:
> Cluster uses mix of Sun's X4100/X4200 machines linked with Sun
> supplied Infiniband and host adapters. All machines are running
> Solaris 10_x86 (11/06) with latest kernel patches
> Software is Sun Clustertools 7.
>
> Node2 $ ifconfig ibd1
> ibd1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 2044 index 3
> inet 192.168.50.202 netmask ffffff00 broadcast 192.168.50.255
>
> Node1 $ ifconfig ibd1
> ibd1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 2044 index 3
> inet 192.168.50.201 netmask ffffff00 broadcast 192.168.50.255
>
>
> ompi_info -a
> Open MPI: 1.2.1r14096-ct7b030r1838
> Open MPI SVN revision: 0
> Open RTE: 1.2.1r14096-ct7b030r1838
> Open RTE SVN revision: 0
> OPAL: 1.2.1r14096-ct7b030r1838
> OPAL SVN revision: 0
> MCA backtrace: printstack (MCA v1.0, API v1.0, Component v1.2.1)
> MCA paffinity: solaris (MCA v1.0, API v1.0, Component v1.2.1)
> MCA maffinity: first_use (MCA v1.0, API v1.0, Component v1.2.1)
> MCA timer: solaris (MCA v1.0, API v1.0, Component v1.2.1)
> MCA allocator: basic (MCA v1.0, API v1.0, Component v1.0)
> MCA allocator: bucket (MCA v1.0, API v1.0, Component v1.0)
> MCA coll: basic (MCA v1.0, API v1.0, Component v1.2.1)
> MCA coll: self (MCA v1.0, API v1.0, Component v1.2.1)
> MCA coll: sm (MCA v1.0, API v1.0, Component v1.2.1)
> MCA coll: tuned (MCA v1.0, API v1.0, Component v1.2.1)
> MCA io: romio (MCA v1.0, API v1.0, Component v1.2.1)
> MCA mpool: sm (MCA v1.0, API v1.0, Component v1.2.1)
> MCA mpool: udapl (MCA v1.0, API v1.0, Component v1.2.1)
> MCA pml: cm (MCA v1.0, API v1.0, Component v1.2.1)
> MCA pml: ob1 (MCA v1.0, API v1.0, Component v1.2.1)
> MCA bml: r2 (MCA v1.0, API v1.0, Component v1.2.1)
> MCA rcache: rb (MCA v1.0, API v1.0, Component v1.2.1)
> MCA rcache: vma (MCA v1.0, API v1.0, Component v1.2.1)
> MCA btl: self (MCA v1.0, API v1.0.1, Component v1.2.1)
> MCA btl: sm (MCA v1.0, API v1.0.1, Component v1.2.1)
> MCA btl: tcp (MCA v1.0, API v1.0.1, Component v1.0)
> MCA btl: udapl (MCA v1.0, API v1.0, Component v1.2.1)
> MCA topo: unity (MCA v1.0, API v1.0, Component v1.2.1)
> MCA osc: pt2pt (MCA v1.0, API v1.0, Component v1.2.1)
> MCA errmgr: hnp (MCA v1.0, API v1.3, Component v1.2.1)
> MCA errmgr: orted (MCA v1.0, API v1.3, Component v1.2.1)
> MCA errmgr: proxy (MCA v1.0, API v1.3, Component v1.2.1)
> MCA gpr: null (MCA v1.0, API v1.0, Component v1.2.1)
> MCA gpr: proxy (MCA v1.0, API v1.0, Component v1.2.1)
> MCA gpr: replica (MCA v1.0, API v1.0, Component v1.2.1)
> MCA iof: proxy (MCA v1.0, API v1.0, Component v1.2.1)
> MCA iof: svc (MCA v1.0, API v1.0, Component v1.2.1)
> MCA ns: proxy (MCA v1.0, API v2.0, Component v1.2.1)
> MCA ns: replica (MCA v1.0, API v2.0, Component v1.2.1)
> MCA oob: tcp (MCA v1.0, API v1.0, Component v1.0)
> MCA ras: dash_host (MCA v1.0, API v1.3, Component v1.2.1)
> MCA ras: gridengine (MCA v1.0, API v1.3, Component v1.2.1)
> MCA ras: localhost (MCA v1.0, API v1.3, Component v1.2.1)
> MCA ras: tm (MCA v1.0, API v1.3, Component v1.2.1)
> MCA rds: hostfile (MCA v1.0, API v1.3, Component v1.2.1)
> MCA rds: proxy (MCA v1.0, API v1.3, Component v1.2.1)
> MCA rds: resfile (MCA v1.0, API v1.3, Component v1.2.1)
> MCA rmaps: round_robin (MCA v1.0, API v1.3, Component v1.2.1)
> MCA rmgr: proxy (MCA v1.0, API v2.0, Component v1.2.1)
> MCA rmgr: urm (MCA v1.0, API v2.0, Component v1.2.1)
> MCA rml: oob (MCA v1.0, API v1.0, Component v1.2.1)
> MCA pls: gridengine (MCA v1.0, API v1.3, Component v1.2.1)
> MCA pls: proxy (MCA v1.0, API v1.3, Component v1.2.1)
> MCA pls: rsh (MCA v1.0, API v1.3, Component v1.2.1)
> MCA pls: tm (MCA v1.0, API v1.3, Component v1.2.1)
> MCA sds: env (MCA v1.0, API v1.0, Component v1.2.1)
> MCA sds: pipe (MCA v1.0, API v1.0, Component v1.2.1)
> MCA sds: seed (MCA v1.0, API v1.0, Component v1.2.1)
> MCA sds: singleton (MCA v1.0, API v1.0, Component v1.2.1)
> Prefix: /opt/SUNWhpc/HPC7.0
> Bindir: /opt/SUNWhpc/HPC7.0/bin
> Libdir: /opt/SUNWhpc/HPC7.0/lib
> Incdir: /opt/SUNWhpc/HPC7.0/include
> Pkglibdir: /opt/SUNWhpc/HPC7.0/lib/openmpi
> Sysconfdir: /opt/SUNWhpc/HPC7.0/etc
> Configured architecture: i386-pc-solaris2.10
> Configured by: root
> Configured on: Fri Mar 30 13:40:12 EDT 2007
> Configure host: burpen-csx10-0
> Built by: root
> Built on: Fri Mar 30 13:57:25 EDT 2007
> Built host: burpen-csx10-0
> C bindings: yes
> C++ bindings: yes
> Fortran77 bindings: yes (all)
> Fortran90 bindings: yes
> Fortran90 bindings size: trivial
> C compiler: cc
> C compiler absolute: /ws/ompi-tools/SUNWspro/SOS11/bin/cc
> C char size: 1
> C bool size: 1
> C short size: 2
> C int size: 4
> C long size: 4
> C float size: 4
> C double size: 8
> C pointer size: 4
> C char align: 1
> C bool align: 1
> C int align: 4
> C float align: 4
> C double align: 4
> C++ compiler: CC
> C++ compiler absolute: /ws/ompi-tools/SUNWspro/SOS11/bin/CC
> Fortran77 compiler: f77
> Fortran77 compiler abs: /ws/ompi-tools/SUNWspro/SOS11/bin/f77
> Fortran90 compiler: f95
> Fortran90 compiler abs: /ws/ompi-tools/SUNWspro/SOS11/bin/f95
> Fort integer size: 4
> Fort logical size: 4
> Fort logical value true: 1
> Fort have integer1: yes
> Fort have integer2: yes
> Fort have integer4: yes
> Fort have integer8: yes
> Fort have integer16: no
> Fort have real4: yes
> Fort have real8: yes
> Fort have real16: no
> Fort have complex8: yes
> Fort have complex16: yes
> Fort have complex32: no
> Fort integer1 size: 1
> Fort integer2 size: 2
> Fort integer4 size: 4
> Fort integer8 size: 8
> Fort integer16 size: -1
> Fort real size: 4
> Fort real4 size: 4
> Fort real8 size: 8
> Fort real16 size: -1
> Fort dbl prec size: 4
> Fort cplx size: 4
> Fort dbl cplx size: 4
> Fort cplx8 size: 8
> Fort cplx16 size: 16
> Fort cplx32 size: -1
> Fort integer align: 4
> Fort integer1 align: 1
> Fort integer2 align: 2
> Fort integer4 align: 4
> Fort integer8 align: 4
> Fort integer16 align: -1
> Fort real align: 4
> Fort real4 align: 4
> Fort real8 align: 4
> Fort real16 align: -1
> Fort dbl prec align: 4
> Fort cplx align: 4
> Fort dbl cplx align: 4
> Fort cplx8 align: 4
> Fort cplx16 align: 4
> Fort cplx32 align: -1
> C profiling: yes
> C++ profiling: yes
> Fortran77 profiling: yes
> Fortran90 profiling: yes
> C++ exceptions: yes
> Thread support: no
> Build CFLAGS: -DNDEBUG -xtarget=opteron -xarch=sse2 -xprefetch
> -xprefetch_level=2 -xvector=simd
> -xdepend=yes -xbuiltin=%all
> -xO5
> Build CXXFLAGS: -DNDEBUG -xtarget=opteron -xarch=sse2 -xprefetch
> -xprefetch_level=2 -xvector=simd
> -xdepend=yes -xbuiltin=%all
> -xO5
> Build FFLAGS: -xtarget=opteron -xarch=sse2 -xprefetch
> -xprefetch_level=2
> -xvector=simd -stackvar -xO5
> Build FCFLAGS: -xtarget=opteron -xarch=sse2 -xprefetch
> -xprefetch_level=2
> -xvector=simd -stackvar -xO5
> Build LDFLAGS: -export-dynamic -R/opt/mx/lib
> -R/opt/SUNWhpc/HPC7.0/lib
> -R/opt/mx/lib/amd64 -R/opt/SUNWhpc/HPC7.0/lib/amd64
> -R/opt/mx/lib -R/opt/SUNWhpc/HPC7.0/lib
> -R/opt/mx/lib/amd64
> -R/opt/SUNWhpc/HPC7.0/lib/amd64 -R/opt/mx/lib
> -R/opt/SUNWhpc/HPC7.0/lib -R/opt/mx/lib/amd64
> -R/opt/SUNWhpc/HPC7.0/lib/amd64
> Build LIBS: -lsocket -lnsl -lrt -lm
> Wrapper extra CFLAGS:
> Wrapper extra CXXFLAGS:
> Wrapper extra FFLAGS:
> Wrapper extra FCFLAGS:
> Wrapper extra LDFLAGS: -R/opt/mx/lib -R/opt/SUNWhpc/HPC7.0/lib
> -R/opt/mx/lib/amd64
> -R/opt/SUNWhpc/HPC7.0/lib/amd64
> Wrapper extra LIBS: -lsocket -lnsl -lrt -lm -ldl
> Internal debug support: no
> MPI parameter check: runtime
> Memory profiling support: no
> Memory debugging support: no
> libltdl support: yes
> Heterogeneous support: yes
> mpirun default --prefix: yes
> MCA mca: parameter "mca_param_files" (current value:
>
> "/home/tomcat/.openmpi/mca-params.conf:/opt/SUNWhpc/HPC7.0/etc/openmpi-mca-par
> ams.conf")
> Path for MCA configuration files containing
> default parameter
> values
> MCA mca: parameter "mca_component_path" (current value:
>
> "/opt/SUNWhpc/HPC7.0/lib/openmpi:/home/tomcat/.openmpi/components")
> Path where to look for Open MPI and ORTE components
> MCA mca: parameter "mca_verbose" (current value: <none>)
> Top-level verbosity parameter
> MCA mca: parameter "mca_component_show_load_errors"
> (current value: "0")
> Whether to show errors for components that
> failed to load or
> not
> MCA mca: parameter "mca_component_disable_dlopen"
> (current value: "0")
> Whether to attempt to disable opening
> dynamic components or not
> MCA mpi: parameter "mpi_param_check" (current value: "1")
> Whether you want MPI API parameters checked
> at run-time or not.
> Possible values are 0 (no checking) and 1
> (perform checking at
> run-time)
> MCA mpi: parameter "mpi_yield_when_idle" (current value:
> "0")
> Yield the processor when waiting for MPI
> communication (for MPI
> processes, will default to 1 when
> oversubscribing nodes)
> MCA mpi: parameter "mpi_event_tick_rate" (current value:
> "-1")
> How often to progress TCP communications (0
> = never, otherwise
> specified in microseconds)
> MCA mpi: parameter "mpi_show_handle_leaks" (current
> value: "0")
> Whether MPI_FINALIZE shows all MPI handles
> that were not freed
> or not
> MCA mpi: parameter "mpi_no_free_handles" (current value:
> "0")
> Whether to actually free MPI objects when
> their handles are
> freed
> MCA mpi: parameter "mpi_show_mca_params" (current value:
> "0")
> Whether to show all MCA parameter value
> during MPI_INIT or not
> (good for reproducability of MPI jobs)
> MCA mpi: parameter "mpi_show_mca_params_file"
> (current value: <none>)
> If mpi_show_mca_params is true, setting
> this string to a valid
> filename tells Open MPI to dump all the MCA
> parameter values
> into a file suitable for reading via the
> mca_param_files
> parameter (good for reproducability of MPI jobs)
> MCA mpi: parameter "mpi_paffinity_alone" (current value:
> "0")
> If nonzero, assume that this job is the only (set
> of)
> process(es) running on each node and bind
> processes to
> processors, starting with processor ID 0
> MCA mpi: parameter "mpi_keep_peer_hostnames"
> (current value: "1")
> If nonzero, save the string hostnames of
> all MPI peer processes
> (mostly for error / debugging output
> messages). This can add
> quite a bit of memory usage to each MPI process.
> MCA mpi: parameter "mpi_abort_delay" (current value: "0")
> If nonzero, print out an identifying
> message when MPI_ABORT is
> invoked (hostname, PID of the process that
> called MPI_ABORT) and
> delay for that many seconds before exiting
> (a negative delay
> value means to never abort). This allows
> attaching of a
> debugger before quitting the job.
> MCA mpi: information "mpi_abort_print_stack" (value: "0")
> If nonzero, print out a stack trace when
> MPI_ABORT is invoked
> MCA mpi: parameter "mpi_preconnect_all" (current value: "0")
> Whether to force MPI processes to create
> connections / warmup
> with *all* peers during MPI_INIT (vs.
> making connections lazily
> -- upon the first MPI traffic between each
> process peer pair)
> MCA mpi: parameter "mpi_preconnect_oob" (current value: "0")
> Whether to force MPI processes to fully
> wire-up the OOB system
> between MPI processes.
> MCA mpi: parameter "mpi_leave_pinned" (current value: "0")
> Whether to use the "leave pinned" protocol
> or not. Enabling
> this setting can help bandwidth performance
> when repeatedly
> sending and receiving large messages with
> the same buffers over
> RDMA-based networks.
> MCA mpi: parameter "mpi_leave_pinned_pipeline"
> (current value: "0")
> Whether to use the "leave pinned pipeline"
> protocol or not.
> MCA orte: parameter "orte_debug" (current value: "0")
> Top-level ORTE debug switch
> MCA orte: parameter "orte_no_daemonize" (current value: "0")
> Whether to properly daemonize the ORTE daemons or
> not
> MCA orte: parameter "orte_base_user_debugger"
> (current value: "totalview
> @mpirun@ -a @mpirun_args@ : fxp @mpirun@ -a
> @mpirun_args@")
> Sequence of user-level debuggers to search
> for in orterun
> MCA orte: parameter "orte_abort_timeout" (current value:
> "10")
> Time to wait [in seconds] before giving up
> on aborting an ORTE
> operation
> MCA orte: parameter "orte_timing" (current value: "0")
> Request that critical timing loops be measured
> MCA opal: parameter "opal_signal" (current value:
> "6,10,8,11")
> If a signal is received, display the stack
> trace frame
> MCA backtrace: parameter "backtrace" (current value: <none>)
> Default selection set of components for the
> backtrace framework
> (<none> means "use all components that can be
> found")
> MCA backtrace: parameter "backtrace_base_verbose" (current
> value: "0")
> Verbosity level for the backtrace framework
> (0 = no verbosity)
> MCA backtrace: parameter "backtrace_printstack_priority"
> (current value: "0")
> MCA memory: parameter "memory" (current value: <none>)
> Default selection set of components for the
> memory framework
> (<none> means "use all components that can be
> found")
> MCA memory: parameter "memory_base_verbose" (current value:
> "0")
> Verbosity level for the memory framework (0
> = no verbosity)
> MCA paffinity: parameter "paffinity" (current value: <none>)
> Default selection set of components for the
> paffinity framework
> (<none> means "use all components that can be
> found")
> MCA paffinity: parameter "paffinity_solaris_priority"
> (current value: "10")
> Priority of the solaris paffinity component
> MCA maffinity: parameter "maffinity" (current value: <none>)
> Default selection set of components for the
> maffinity framework
> (<none> means "use all components that can be
> found")
> MCA maffinity: parameter "maffinity_first_use_priority"
> (current value: "10")
> Priority of the first_use maffinity component
> MCA timer: parameter "timer" (current value: <none>)
> Default selection set of components for the
> timer framework
> (<none> means "use all components that can be
> found")
> MCA timer: parameter "timer_base_verbose" (current value: "0")
> Verbosity level for the timer framework (0
> = no verbosity)
> MCA timer: parameter "timer_solaris_priority" (current
> value: "0")
> MCA allocator: parameter "allocator" (current value: <none>)
> Default selection set of components for the
> allocator framework
> (<none> means "use all components that can be
> found")
> MCA allocator: parameter "allocator_base_verbose" (current
> value: "0")
> Verbosity level for the allocator framework
> (0 = no verbosity)
> MCA allocator: parameter "allocator_basic_priority"
> (current value: "0")
> MCA allocator: parameter "allocator_bucket_num_buckets"
> (current value: "30")
> MCA allocator: parameter "allocator_bucket_priority"
> (current value: "0")
> MCA coll: parameter "coll" (current value: <none>)
> Default selection set of components for the
> coll framework
> (<none> means "use all components that can be
> found")
> MCA coll: parameter "coll_base_verbose" (current value: "0")
> Verbosity level for the coll framework (0 =
> no verbosity)
> MCA coll: parameter "coll_basic_priority" (current value:
> "10")
> Priority of the basic coll component
> MCA coll: parameter "coll_basic_crossover" (current value:
> "4")
> Minimum number of processes in a
> communicator before using the
> logarithmic algorithms
> MCA coll: parameter "coll_self_priority" (current value:
> "75")
> MCA coll: parameter "coll_sm_priority" (current value: "0")
> Priority of the sm coll component
> MCA coll: parameter "coll_sm_control_size" (current
> value: "4096")
> Length of the control data -- should
> usually be either the
> length of a cache line on most SMPs, or the
> size of a page on
> machines that support direct memory
> affinity page placement (in
> bytes)
> MCA coll: parameter "coll_sm_bootstrap_filename"
> (current value:
> "shared_mem_sm_bootstrap")
> Filename (in the Open MPI session
> directory) of the coll sm
> component bootstrap rendezvous mmap file
> MCA coll: parameter "coll_sm_bootstrap_num_segments"
> (current value: "8")
> Number of segments in the bootstrap file
> MCA coll: parameter "coll_sm_fragment_size" (current
> value: "8192")
> Fragment size (in bytes) used for passing
> data through shared
> memory (will be rounded up to the nearest
> control_size size)
> MCA coll: parameter "coll_sm_mpool" (current value: "sm")
> Name of the mpool component to use
> MCA coll: parameter "coll_sm_comm_in_use_flags"
> (current value: "2")
> Number of "in use" flags, used to mark a
> message passing area
> segment as currently being used or not
> (must be >= 2 and <=
> comm_num_segments)
> MCA coll: parameter "coll_sm_comm_num_segments"
> (current value: "8")
> Number of segments in each communicator's
> shared memory message
> passing area (must be >= 2, and must be a multiple
> of
> comm_in_use_flags)
> MCA coll: parameter "coll_sm_tree_degree" (current value:
> "4")
> Degree of the tree for tree-based
> operations (must be => 1 and
> <= min(control_size, 255))
> MCA coll: information
> "coll_sm_shared_mem_used_bootstrap" (value: "160")
> Amount of shared memory used in the shared
> memory bootstrap area
> (in bytes)
> MCA coll: parameter "coll_sm_info_num_procs" (current
> value: "4")
> Number of processes to use for the calculation of
> the
> shared_mem_size MCA information parameter
> (must be => 2)
> MCA coll: information "coll_sm_shared_mem_used_data"
> (value: "548864")
> Amount of shared memory used in the shared
> memory data area for
> info_num_procs processes (in bytes)
> MCA coll: parameter "coll_tuned_priority" (current value:
> "30")
> Priority of the tuned coll component
> MCA coll: parameter
> "coll_tuned_pre_allocate_memory_comm_size_limit"
> (current value: "32768")
> Size of communicator were we stop
> pre-allocating memory for the
> fixed internal buffer used for message
> requests etc that is hung
> off the communicator data segment. I.e. if
> you have a 100'000
> nodes you might not want to pre-allocate
> 200'000 request handle
> slots per communicator instance!
> MCA coll: parameter "coll_tuned_init_tree_fanout"
> (current value: "4")
> Inital fanout used in the tree topologies
> for each communicator.
> This is only an initial guess, if a tuned
> collective needs a
> different fanout for an operation, it build
> it dynamically. This
> parameter is only for the first guess and
> might save a little
> time
> MCA coll: parameter "coll_tuned_init_chain_fanout"
> (current value: "4")
> Inital fanout used in the chain (fanout
> followed by pipeline)
> topologies for each communicator. This is
> only an initial guess,
> if a tuned collective needs a different
> fanout for an operation,
> it build it dynamically. This parameter is
> only for the first
> guess and might save a little time
> MCA coll: parameter "coll_tuned_use_dynamic_rules"
> (current value: "0")
> Switch used to decide if we use static
> (compiled/if statements)
> or dynamic (built at runtime) decision function
> rules
> MCA io: parameter "io_base_freelist_initial_size"
> (current value: "16")
> Initial MPI-2 IO request freelist size
> MCA io: parameter "io_base_freelist_max_size"
> (current value: "64")
> Max size of the MPI-2 IO request freelist
> MCA io: parameter "io_base_freelist_increment"
> (current value: "16")
> Increment size of the MPI-2 IO request freelist
> MCA io: parameter "io" (current value: <none>)
> Default selection set of components for the
> io framework (<none>
> means "use all components that can be found")
> MCA io: parameter "io_base_verbose" (current value: "0")
> Verbosity level for the io framework (0 =
> no verbosity)
> MCA io: parameter "io_romio_priority" (current value: "10")
> Priority of the io romio component
> MCA io: parameter "io_romio_delete_priority"
> (current value: "10")
> Delete priority of the io romio component
> MCA io: parameter
> "io_romio_enable_parallel_optimizations" (current
> value: "0")
> Enable set of Open MPI-added options to
> improve collective file
> i/o performance
> MCA mpool: parameter "mpool" (current value: <none>)
> Default selection set of components for the
> mpool framework
> (<none> means "use all components that can be
> found")
> MCA mpool: parameter "mpool_base_verbose" (current value: "0")
> Verbosity level for the mpool framework (0
> = no verbosity)
> MCA mpool: parameter "mpool_sm_allocator" (current
> value: "bucket")
> Name of allocator component to use with sm mpool
> MCA mpool: parameter "mpool_sm_max_size" (current
> value: "536870912")
> Maximum size of the sm mpool shared memory file
> MCA mpool: parameter "mpool_sm_min_size" (current
> value: "134217728")
> Minimum size of the sm mpool shared memory file
> MCA mpool: parameter "mpool_sm_per_peer_size" (current
> value: "33554432")
> Size (in bytes) to allocate per local peer
> in the sm mpool
> shared memory file, bounded by min_size and
> max_size
> MCA mpool: parameter "mpool_sm_priority" (current value: "0")
> MCA mpool: parameter "mpool_udapl_priority" (current value:
> "0")
> MCA mpool: parameter "mpool_base_use_mem_hooks"
> (current value: "0")
> use memory hooks for deregistering freed memory
> MCA mpool: parameter "mpool_use_mem_hooks" (current value:
> "0")
> (deprecated, use mpool_base_use_mem_hooks)
> MCA pml: parameter "pml" (current value: <none>)
> Default selection set of components for the
> pml framework
> (<none> means "use all components that can be
> found")
> MCA pml: parameter "pml_base_verbose" (current value: "0")
> Verbosity level for the pml framework (0 =
> no verbosity)
> MCA pml: parameter "pml_cm_free_list_num" (current value:
> "4")
> Initial size of request free lists
> MCA pml: parameter "pml_cm_free_list_max" (current
> value: "-1")
> Maximum size of request free lists
> MCA pml: parameter "pml_cm_free_list_inc" (current
> value: "64")
> Number of elements to add when growing
> request free lists
> MCA pml: parameter "pml_cm_priority" (current value: "30")
> CM PML selection priority
> MCA pml: parameter "pml_ob1_free_list_num" (current
> value: "4")
> MCA pml: parameter "pml_ob1_free_list_max" (current
> value: "-1")
> MCA pml: parameter "pml_ob1_free_list_inc" (current
> value: "64")
> MCA pml: parameter "pml_ob1_priority" (current value: "20")
> MCA pml: parameter "pml_ob1_eager_limit" (current
> value: "131072")
> MCA pml: parameter "pml_ob1_send_pipeline_depth"
> (current value: "3")
> MCA pml: parameter "pml_ob1_recv_pipeline_depth"
> (current value: "4")
> MCA bml: parameter "bml" (current value: <none>)
> Default selection set of components for the
> bml framework
> (<none> means "use all components that can be
> found")
> MCA bml: parameter "bml_base_verbose" (current value: "0")
> Verbosity level for the bml framework (0 =
> no verbosity)
> MCA bml: parameter "bml_r2_show_unreach_errors"
> (current value: "1")
> Show error message when procs are unreachable
> MCA bml: parameter "bml_r2_priority" (current value: "0")
> MCA rcache: parameter "rcache" (current value: <none>)
> Default selection set of components for the
> rcache framework
> (<none> means "use all components that can be
> found")
> MCA rcache: parameter "rcache_base_verbose" (current value:
> "0")
> Verbosity level for the rcache framework (0
> = no verbosity)
> MCA rcache: parameter "rcache_rb_priority" (current value: "0")
> MCA rcache: parameter "rcache_vma_mru_len" (current value:
> "256")
> The maximum size IN ENTRIES of the MRU
> (most recently used)
> rcache list
> MCA rcache: parameter "rcache_vma_mru_size" (current
> value: "1073741824")
> The maximum size IN BYTES of the MRU (most
> recently used) rcache
> list
> MCA rcache: parameter "rcache_vma_priority" (current value:
> "0")
> MCA btl: parameter "btl_base_debug" (current value: "0")
> If btl_base_debug is 1 standard debug is
> output, if > 1 verbose
> debug is output
> MCA btl: parameter "btl" (current value: <none>)
> Default selection set of components for the
> btl framework
> (<none> means "use all components that can be
> found")
> MCA btl: parameter "btl_base_verbose" (current value: "0")
> Verbosity level for the btl framework (0 =
> no verbosity)
> MCA btl: parameter "btl_self_free_list_num" (current
> value: "0")
> Number of fragments by default
> MCA btl: parameter "btl_self_free_list_max" (current
> value: "-1")
> Maximum number of fragments
> MCA btl: parameter "btl_self_free_list_inc" (current
> value: "32")
> Increment by this number of fragments
> MCA btl: parameter "btl_self_eager_limit" (current
> value: "131072")
> Eager size fragmeng (before the rendez-vous
> ptotocol)
> MCA btl: parameter "btl_self_min_send_size" (current
> value: "262144")
> Minimum fragment size after the rendez-vous
> MCA btl: parameter "btl_self_max_send_size" (current
> value: "262144")
> Maximum fragment size after the rendez-vous
> MCA btl: parameter "btl_self_min_rdma_size" (current value:
> "2147483647")
> Maximum fragment size for the RDMA transfer
> MCA btl: parameter "btl_self_max_rdma_size" (current value:
> "2147483647")
> Maximum fragment size for the RDMA transfer
> MCA btl: parameter "btl_self_exclusivity" (current
> value: "65536")
> Device exclusivity
> MCA btl: parameter "btl_self_flags" (current value: "10")
> Active behavior flags
> MCA btl: parameter "btl_self_priority" (current value: "0")
> MCA btl: parameter "btl_sm_free_list_num" (current value:
> "8")
> MCA btl: parameter "btl_sm_free_list_max" (current
> value: "-1")
> MCA btl: parameter "btl_sm_free_list_inc" (current
> value: "64")
> MCA btl: parameter "btl_sm_exclusivity" (current
> value: "65535")
> MCA btl: parameter "btl_sm_latency" (current value: "100")
> MCA btl: parameter "btl_sm_max_procs" (current value: "-1")
> MCA btl: parameter "btl_sm_sm_extra_procs" (current
> value: "2")
> MCA btl: parameter "btl_sm_mpool" (current value: "sm")
> MCA btl: parameter "btl_sm_eager_limit" (current
> value: "4096")
> MCA btl: parameter "btl_sm_max_frag_size" (current
> value: "32768")
> MCA btl: parameter "btl_sm_size_of_cb_queue"
> (current value: "128")
> MCA btl: parameter "btl_sm_cb_lazy_free_freq"
> (current value: "120")
> MCA btl: parameter "btl_sm_priority" (current value: "0")
> MCA btl: parameter "btl_tcp_if_include" (current
> value: <none>)
> MCA btl: parameter "btl_tcp_if_exclude" (current value:
> "lo")
> MCA btl: parameter "btl_tcp_free_list_num" (current
> value: "8")
> MCA btl: parameter "btl_tcp_free_list_max" (current
> value: "-1")
> MCA btl: parameter "btl_tcp_free_list_inc" (current
> value: "32")
> MCA btl: parameter "btl_tcp_sndbuf" (current value:
> "131072")
> MCA btl: parameter "btl_tcp_rcvbuf" (current value:
> "131072")
> MCA btl: parameter "btl_tcp_endpoint_cache" (current
> value: "30720")
> MCA btl: parameter "btl_tcp_exclusivity" (current value:
> "0")
> MCA btl: parameter "btl_tcp_eager_limit" (current
> value: "65536")
> MCA btl: parameter "btl_tcp_min_send_size" (current
> value: "65536")
> MCA btl: parameter "btl_tcp_max_send_size" (current
> value: "131072")
> MCA btl: parameter "btl_tcp_min_rdma_size" (current
> value: "131072")
> MCA btl: parameter "btl_tcp_max_rdma_size" (current
> value: "2147483647")
> MCA btl: parameter "btl_tcp_flags" (current value: "122")
> MCA btl: parameter "btl_tcp_priority" (current value: "0")
> MCA btl: parameter "btl_udapl_free_list_num"
> (current value: "8")
> Initial size of free lists (must be >= 1).
> MCA btl: parameter "btl_udapl_free_list_max"
> (current value: "-1")
> Maximum size of free lists (-1 = infinite,
> otherwise must be >=
> 1).
> MCA btl: parameter "btl_udapl_free_list_inc"
> (current value: "8")
> Increment size of free lists (must be >= 1).
> MCA btl: parameter "btl_udapl_mpool" (current value:
> "udapl")
> Name of the memory pool to be used.
> MCA btl: parameter "btl_udapl_max_modules" (current
> value: "8")
> Maximum number of supported HCAs.
> MCA btl: parameter "btl_udapl_num_recvs" (current value:
> "8")
> Total number of receive buffers to keep
> posted per endpoint
> (must be >= 1).
> MCA btl: parameter "btl_udapl_num_sends" (current value:
> "7")
> Maximum number of sends to post on an
> endpoint (must be >= 1).
> MCA btl: parameter "btl_udapl_sr_win" (current value: "4")
> Window size at which point an explicit
> credit message will be
> generated (must be >= 1).
> MCA btl: parameter "btl_udapl_eager_rdma_num"
> (current value: "32")
> Number of RDMA buffers to allocate for
> small messages (must be
>> = 1).
> MCA btl: parameter "btl_udapl_max_eager_rdma_peers"
> (current value:
> "16")
> Maximum number of peers allowed to use RDMA
> for short messages
> (independently RDMA will still be used for
> large messages, (must
> be >= 0; if zero then RDMA will not be used for
> short
> messages).
> MCA btl: parameter "btl_udapl_eager_rdma_win"
> (current value: "28")
> Window size at which point an explicit
> credit message will be
> generated (must be >= 1).
> MCA btl: parameter "btl_udapl_timeout" (current
> value: "10000000")
> Connection timeout, in microseconds.
> MCA btl: parameter "btl_udapl_conn_priv_data"
> (current value: "1")
> Use connect private data to establish
> connections (not supported
> by all uDAPL implementations).
> MCA btl: parameter "btl_udapl_async_events" (current
> value: "100000000")
> The asynchronous event queue will only be
> checked after entering
> progress this number of times.
> MCA btl: parameter "btl_udapl_buffer_alignment"
> (current value: "256")
> Preferred communication buffer alignment,
> in bytes (must be >=
> 1).
> MCA btl: parameter "btl_udapl_async_evd_qlen"
> (current value: "256")
> The asynchronous event dispatcher queue length.
> MCA btl: parameter "btl_udapl_conn_evd_qlen"
> (current value: "256")
> The connection event dispatcher queue
> length is a function of
> the number of connections expected.
> MCA btl: parameter "btl_udapl_dto_evd_qlen" (current
> value: "256")
> The data transfer operation event
> dispatcher queue length is a
> function of the number of connections as
> well as the maximum
> number of outstanding data transfer operations.
> MCA btl: parameter "btl_udapl_max_request_dtos"
> (current value: "76")
> Maximum number of outstanding submitted
> sends and rdma
> operations per endpoint, (see Section 6.6.6
> of uDAPL Spec.).
> MCA btl: parameter "btl_udapl_max_recv_dtos"
> (current value: "8")
> Maximum number of outstanding submitted
> receive operations per
> endpoint, (see Section 6.6.6 of uDAPL Spec.).
> MCA btl: parameter "btl_udapl_exclusivity" (current
> value: "1014")
> uDAPL BTL exclusivity (must be >= 0).
> MCA btl: parameter "btl_udapl_eager_limit" (current
> value: "8192")
> Eager send limit, in bytes (must be >= 1).
> MCA btl: parameter "btl_udapl_min_send_size"
> (current value: "16384")
> Minimum send size, in bytes (must be >= 1).
> MCA btl: parameter "btl_udapl_max_send_size"
> (current value: "65536")
> Maximum send size, in bytes (must be >= 1).
> MCA btl: parameter "btl_udapl_min_rdma_size"
> (current value: "524288")
> Minimum RDMA size, in bytes (must be >= 1).
> MCA btl: parameter "btl_udapl_max_rdma_size"
> (current value: "131072")
> Maximum RDMA size, in bytes (must be >= 1).
> MCA btl: parameter "btl_udapl_flags" (current value: "2")
> BTL flags, added together: PUT=2 (cannot be 0).
> MCA btl: parameter "btl_udapl_bandwidth" (current
> value: "225")
> Approximate maximum bandwidth of network
> (must be >= 1).
> MCA btl: parameter "btl_udapl_priority" (current value: "0")
> MCA btl: parameter "btl_base_include" (current value:
> <none>)
> MCA btl: parameter "btl_base_exclude" (current value:
> <none>)
> MCA btl: parameter "btl_base_warn_component_unused"
> (current value: "0")
> This parameter is used to turn on warning
> messages when certain
> NICs are not used
> MCA mtl: parameter "mtl" (current value: <none>)
> Default selection set of components for the
> mtl framework
> (<none> means "use all components that can be
> found")
> MCA mtl: parameter "mtl_base_verbose" (current value: "0")
> Verbosity level for the mtl framework (0 =
> no verbosity)
> MCA topo: parameter "topo" (current value: <none>)
> Default selection set of components for the
> topo framework
> (<none> means "use all components that can be
> found")
> MCA topo: parameter "topo_base_verbose" (current value: "0")
> Verbosity level for the topo framework (0 =
> no verbosity)
> MCA osc: parameter "osc" (current value: <none>)
> Default selection set of components for the
> osc framework
> (<none> means "use all components that can be
> found")
> MCA osc: parameter "osc_base_verbose" (current value: "0")
> Verbosity level for the osc framework (0 =
> no verbosity)
> MCA osc: parameter "osc_pt2pt_no_locks" (current value: "0")
> Enable optimizations available only if
> MPI_LOCK is not used.
> MCA osc: parameter "osc_pt2pt_eager_limit" (current
> value: "16384")
> Max size of eagerly sent data
> MCA osc: parameter "osc_pt2pt_priority" (current value: "0")
> MCA errmgr: parameter "errmgr" (current value: <none>)
> Default selection set of components for the
> errmgr framework
> (<none> means "use all components that can be
> found")
> MCA errmgr: parameter "errmgr_hnp_debug" (current value: "0")
> MCA errmgr: parameter "errmgr_hnp_priority" (current value:
> "0")
> MCA errmgr: parameter "errmgr_orted_debug" (current value: "0")
> MCA errmgr: parameter "errmgr_orted_priority" (current
> value: "0")
> MCA errmgr: parameter "errmgr_proxy_debug" (current value: "0")
> MCA errmgr: parameter "errmgr_proxy_priority" (current
> value: "0")
> MCA gpr: parameter "gpr_base_maxsize" (current
> value: "2147483647")
> MCA gpr: parameter "gpr_base_blocksize" (current value:
> "512")
> MCA gpr: parameter "gpr" (current value: <none>)
> Default selection set of components for the
> gpr framework
> (<none> means "use all components that can be
> found")
> MCA gpr: parameter "gpr_null_priority" (current value: "0")
> MCA gpr: parameter "gpr_proxy_debug" (current value: "0")
> MCA gpr: parameter "gpr_proxy_priority" (current value: "0")
> MCA gpr: parameter "gpr_replica_debug" (current value: "0")
> MCA gpr: parameter "gpr_replica_isolate" (current value:
> "0")
> MCA gpr: parameter "gpr_replica_priority" (current value:
> "0")
> MCA iof: parameter "iof_base_window_size" (current
> value: "4096")
> MCA iof: parameter "iof_base_service" (current value:
> "0.0.0")
> MCA iof: parameter "iof" (current value: <none>)
> Default selection set of components for the
> iof framework
> (<none> means "use all components that can be
> found")
> MCA iof: parameter "iof_proxy_debug" (current value: "1")
> MCA iof: parameter "iof_proxy_priority" (current value: "0")
> MCA iof: parameter "iof_svc_debug" (current value: "1")
> MCA iof: parameter "iof_svc_priority" (current value: "0")
> MCA ns: parameter "ns" (current value: <none>)
> Default selection set of components for the
> ns framework (<none>
> means "use all components that can be found")
> MCA ns: parameter "ns_proxy_debug" (current value: "0")
> MCA ns: parameter "ns_proxy_maxsize" (current
> value: "2147483647")
> MCA ns: parameter "ns_proxy_blocksize" (current value:
> "512")
> MCA ns: parameter "ns_proxy_priority" (current value: "0")
> MCA ns: parameter "ns_replica_debug" (current value: "0")
> MCA ns: parameter "ns_replica_isolate" (current value: "0")
> MCA ns: parameter "ns_replica_maxsize" (current
> value: "2147483647")
> MCA ns: parameter "ns_replica_blocksize" (current
> value: "512")
> MCA ns: parameter "ns_replica_priority" (current value:
> "0")
> MCA oob: parameter "oob" (current value: <none>)
> Default selection set of components for the
> oob framework
> (<none> means "use all components that can be
> found")
> MCA oob: parameter "oob_base_verbose" (current value: "0")
> Verbosity level for the oob framework (0 =
> no verbosity)
> MCA oob: parameter "oob_tcp_peer_limit" (current value:
> "-1")
> MCA oob: parameter "oob_tcp_peer_retries" (current
> value: "60")
> MCA oob: parameter "oob_tcp_debug" (current value: "0")
> MCA oob: parameter "oob_tcp_include" (current value: <none>)
> MCA oob: parameter "oob_tcp_exclude" (current value: <none>)
> MCA oob: parameter "oob_tcp_sndbuf" (current value:
> "131072")
> MCA oob: parameter "oob_tcp_rcvbuf" (current value:
> "131072")
> MCA oob: parameter "oob_tcp_connect_timeout"
> (current value: "600")
> connect() timeout in seconds, before trying
> next interface
> MCA oob: parameter "oob_tcp_connect_sleep" (current
> value: "1")
> Enable (1) /Disable (0) random sleep for
> connection wireup
> MCA oob: parameter "oob_tcp_listen_mode" (current
> value: "event")
> Mode for HNP to accept incoming connections: event,
> listen_thread
> MCA oob: parameter "oob_tcp_listen_thread_max_queue"
> (current value:
> "10")
> High water mark for queued accepted socket list
> size
> MCA oob: parameter "oob_tcp_listen_thread_max_time"
> (current value:
> "10")
> Maximum amount of time (in milliseconds) to
> wait between
> processing accepted socket list
> MCA oob: parameter "oob_tcp_accept_spin_count"
> (current value: "10")
> Number of times to let accept return
> EWOULDBLOCK before updating
> accepted socket list
> MCA oob: parameter "oob_tcp_priority" (current value: "0")
> MCA ras: parameter "ras" (current value: <none>)
> MCA ras: parameter "ras_dash_host_priority" (current
> value: "5")
> Selection priority for the dash_host RAS component
> MCA ras: parameter "ras_gridengine_debug" (current value:
> "0")
> Enable debugging output for the gridengine
> ras component
> MCA ras: parameter "ras_gridengine_priority"
> (current value: "100")
> Priority of the gridengine ras component
> MCA ras: parameter "ras_gridengine_verbose" (current
> value: "0")
> Enable verbose output for the gridengine
> ras component
> MCA ras: parameter "ras_gridengine_show_jobid"
> (current value: "0")
> Show the JOB_ID of the Grid Engine job
> MCA ras: parameter "ras_localhost_priority" (current
> value: "0")
> Selection priority for the localhost RAS component
> MCA ras: parameter "ras_tm_priority" (current value: "100")
> Priority of the tm ras component
> MCA rds: parameter "rds" (current value: <none>)
> MCA rds: parameter "rds_hostfile_debug" (current value: "0")
> Toggle debug output for hostfile RDS component
> MCA rds: parameter "rds_hostfile_path" (current value:
> "/opt/SUNWhpc/HPC7.0/etc/openmpi-default-hostfile")
> ORTE Host filename
> MCA rds: parameter "rds_hostfile_priority" (current
> value: "0")
> MCA rds: parameter "rds_proxy_priority" (current value: "0")
> MCA rds: parameter "rds_resfile_debug" (current value: "0")
> Toggle debug output for resfile RDS component
> MCA rds: parameter "rds_resfile_name" (current value:
> <none>)
> ORTE Resource filename
> MCA rds: parameter "rds_resfile_priority" (current value:
> "0")
> MCA rmaps: parameter "rmaps_base_verbose" (current value: "0")
> Verbosity level for the rmaps framework
> MCA rmaps: parameter "rmaps_base_schedule_policy"
> (current value:
> "unspec")
> Scheduling Policy for RMAPS. [slot | node]
> MCA rmaps: parameter "rmaps_base_pernode" (current value: "0")
> Launch one ppn as directed
> MCA rmaps: parameter "rmaps_base_n_pernode" (current
> value: "-1")
> Launch n procs/node
> MCA rmaps: parameter "rmaps_base_schedule_local"
> (current value: "1")
> If nonzero, allow scheduling MPI
> applications on the same node
> as mpirun (default). If zero, do not
> schedule any MPI
> applications on the same node as mpirun
> MCA rmaps: parameter "rmaps_base_no_oversubscribe"
> (current value: "0")
> If nonzero, then do not allow
> oversubscription of nodes - mpirun
> will return an error if there aren't enough
> nodes to launch all
> processes without oversubscribing
> MCA rmaps: parameter "rmaps" (current value: <none>)
> Default selection set of components for the
> rmaps framework
> (<none> means "use all components that can be
> found")
> MCA rmaps: parameter "rmaps_round_robin_debug"
> (current value: "1")
> Toggle debug output for Round Robin RMAPS component
> MCA rmaps: parameter "rmaps_round_robin_priority"
> (current value: "1")
> Selection priority for Round Robin RMAPS component
> MCA rmgr: parameter "rmgr" (current value: <none>)
> Default selection set of components for the
> rmgr framework
> (<none> means "use all components that can be
> found")
> MCA rmgr: parameter "rmgr_proxy_priority" (current value:
> "0")
> MCA rmgr: parameter "rmgr_urm_priority" (current value: "0")
> MCA rml: parameter "rml" (current value: <none>)
> Default selection set of components for the
> rml framework
> (<none> means "use all components that can be
> found")
> MCA rml: parameter "rml_base_verbose" (current value: "0")
> Verbosity level for the rml framework (0 =
> no verbosity)
> MCA rml: parameter "rml_oob_priority" (current value: "0")
> MCA pls: parameter "pls_base_reuse_daemons" (current
> value: "0")
> If nonzero, reuse daemons to launch
> dynamically spawned
> processes. If zero, do not reuse daemons (default)
> MCA pls: parameter "pls" (current value: <none>)
> Default selection set of components for the
> pls framework
> (<none> means "use all components that can be
> found")
> MCA pls: parameter "pls_base_verbose" (current value: "0")
> Verbosity level for the pls framework (0 =
> no verbosity)
> MCA pls: parameter "pls_gridengine_debug" (current value:
> "0")
> Enable debugging of gridengine pls component
> MCA pls: parameter "pls_gridengine_verbose" (current
> value: "0")
> Enable verbose output of the gridengine
> qrsh -inherit command
> MCA pls: parameter "pls_gridengine_priority"
> (current value: "100")
> Priority of the gridengine pls component
> MCA pls: parameter "pls_gridengine_orted" (current
> value: "orted")
> The command name that the gridengine pls
> component will invoke
> for the ORTE daemon
> MCA pls: parameter "pls_proxy_priority" (current value: "0")
> MCA pls: parameter "pls_rsh_debug" (current value: "0")
> Whether or not to enable debugging output
> for the rsh pls
> component (0 or 1)
> MCA pls: parameter "pls_rsh_num_concurrent" (current
> value: "128")
> How many pls_rsh_agent instances to invoke
> concurrently (must be
>> 0)
> MCA pls: parameter "pls_rsh_force_rsh" (current value: "0")
> Force the launcher to always use rsh, even
> for local daemons
> MCA pls: parameter "pls_rsh_orted" (current value: "orted")
> The command name that the rsh pls component
> will invoke for the
> ORTE daemon
> MCA pls: parameter "pls_rsh_priority" (current value: "10")
> Priority of the rsh pls component
> MCA pls: parameter "pls_rsh_delay" (current value: "1")
> Delay (in seconds) between invocations of
> the remote agent, but
> only used when the "debug" MCA parameter is
> true, or the
> top-level MCA debugging is enabled
> (otherwise this value is
> ignored)
> MCA pls: parameter "pls_rsh_reap" (current value: "1")
> If set to 1, wait for all the processes to
> complete before
> exiting. Otherwise, quit immediately --
> without waiting for
> confirmation that all other processes in the job
> have
> completed.
> MCA pls: parameter "pls_rsh_assume_same_shell"
> (current value: "1")
> If set to 1, assume that the shell on the
> remote node is the
> same as the shell on the local node.
> Otherwise, probe for what
> the remote shell.
> MCA pls: parameter "pls_rsh_agent" (current value:
> "ssh : rsh")
> The command used to launch executables on
> remote nodes
> (typically either "ssh" or "rsh")
> MCA pls: parameter "pls_tm_debug" (current value: "0")
> Enable debugging of the TM pls
> MCA pls: parameter "pls_tm_verbose" (current value: "0")
> Enable verbose output of the TM pls
> MCA pls: parameter "pls_tm_priority" (current value: "75")
> Default selection priority
> MCA pls: parameter "pls_tm_orted" (current value: "orted")
> Command to use to start proxy orted
> MCA pls: parameter "pls_tm_want_path_check" (current
> value: "1")
> Whether the launching process should check
> for the pls_tm_orted
> executable in the PATH before launching
> (the TM API does not
> give an idication of failure; this is a
> somewhat-lame
> workaround; non-zero values enable this check)
> MCA sds: parameter "sds" (current value: <none>)
> Default selection set of components for the
> sds framework
> (<none> means "use all components that can be
> found")
> MCA sds: parameter "sds_base_verbose" (current value: "0")
> Verbosity level for the sds framework (0 =
> no verbosity)
> MCA sds: parameter "sds_env_priority" (current value: "0")
> MCA sds: parameter "sds_pipe_priority" (current value: "0")
> MCA sds: parameter "sds_seed_priority" (current value: "0")
> MCA sds: parameter "sds_singleton_priority" (current
> value: "0")
> _______________________________________________
> users mailing list
> us...@open-mpi.org
> http://www.open-mpi.org/mailman/listinfo.cgi/users
