Could u please send the output of /etc/contrail/contrail-vroute-agent.conf


On 3/12/15 5:40 PM, "Phil Bedard" <[email protected]> wrote:

>I'm installing Contrail in a test lab on three VMs, Ubuntu 14.04 on all
>the nodes.  
>
>I've installed Contrail a couple times before in a similar setup and
>haven't had too many issues but this time nothing seems to work.  I
>populated the testbed.py file with three nodes.  One node acting as the
>main config/controller/etc. and then two compute nodes.  The fab install
>and fab setup commands all completed with no issues, however when I go
>into the web UI, it shows the control node (running on the same node as
>the webui) and two vrouters as down.  It also shows no config nodes or
>analytics nodes present.
>
>On the compute nodes I see the following in the vrouter agent logs on
>both hosts: 
>
>2015-03-12 Thu 19:35:59:182.489 EDT  contrail-compute-1 [Thread
>140269914363648, Pid 1602]: SANDESH: Send FAILED: 1426203359182474
>[SYS_INFO]: XmppConnectionLog: connection= [ ip_address = 10.4.7.75 state
>= Connect event = Connect Event local_port = 39683 remote_port =
>4294967295 ] file = controller/src/xmpp/xmpp_state_machine.cc line = 1264
>2015-03-12 Thu 19:35:59:182.641 EDT  contrail-compute-1 [Thread
>140270072567680, Pid 1602]: SANDESH: Send FAILED: 1426203359182631 XMPP
>[SYS_NOTICE]: XmppEventLog:  Mode Client:  Event: Tcp Connect Fail
>peer:  10.4.7.75 controller/src/xmpp/xmpp_state_machine.cc 1051
>2015-03-12 Thu 19:35:59:182.714 EDT  contrail-compute-1 [Thread
>140269914363648, Pid 1602]: SANDESH: Send FAILED: 1426203359182704
>[SYS_INFO]: XmppConnectionLog: connection= [ ip_address = 10.4.7.75 state
>= Connect next_state = Active event = EvTcpConnectFail ] file =
>controller/src/xmpp/xmpp_state_machine.cc line = 1264
>2015-03-12 Thu 19:35:59:182.743 EDT  contrail-compute-1 [Thread
>140269914363648, Pid 1602]: SANDESH: Send FAILED: 1426203359182736
>[SYS_INFO]: XmppConnectionLog: connection= [ ip_address = 10.4.7.75 state
>= Active event = Connect failed after retries ] file =
>controller/src/xmpp/xmpp_state_machine.cc line = 1264
>2015-03-12 Thu 19:36:02:792.498 EDT  contrail-compute-1 [Thread
>140270072567680, Pid 1602]: SANDESH: Send FAILED: 1426203362792487 TCP
>[SYS_DEBUG]: TcpSessionMessageLog: Session
>10.4.7.76:52563::10.4.7.75:8086(-1) < Active session connection complete
>controller/src/io/tcp_session.cc 182
>2015-03-12 Thu 19:36:10:794.678 EDT  contrail-compute-1 [Thread
>140270072567680, Pid 1602]: SANDESH: Send FAILED: 1426203370794666 TCP
>[SYS_DEBUG]: TcpSessionMessageLog: Session
>10.4.7.76:52575::10.4.7.75:8086(-1) < Active session connection complete
>controller/src/io/tcp_session.cc 182
>
>
>
>About the only thing that seems to work is the BGP peering session from
>the control node to an external MX.
>
>Any pointers?  
>
>Thanks, 
>
>Phil 
>
>
>
>_______________________________________________
>Users mailing list
>[email protected]
>http://lists.opencontrail.org/mailman/listinfo/users_lists.opencontrail.or
>g


_______________________________________________
Users mailing list
[email protected]
http://lists.opencontrail.org/mailman/listinfo/users_lists.opencontrail.org

Reply via email to