I also ran into an issue doing an uninstall on Ubuntu where if I was previously using a static defined interface, the uninstall would replace the eth0 section with one using DHCP and did not remove the vhost0 interface definition. So once it did the automatic reboot it rendered the host inaccessible.
Phil -----Original Message----- From: Phil Bedard Date: Friday, March 13, 2015 at 17:41 To: Pedro Marques, Nipa Kumar, "[email protected]" Subject: Re: [Users] Issues installing Contrail 2.1 >Yes I figured that out after looking at some of the files. I've decided to >pass on Contrail for the time being until some of the install issues are >sorted out. Using a clean Ubuntu 14.04.1, 14.04.2, and Centos 6.5 resulted in >too many errors. The client nodes are setup with usernames/passwords to get >to ifmap-server, but ifmap-server doesn't populate any of those names in its >configuration. > >Phil > > > > >-----Original Message----- >From: Pedro Marques >Date: Friday, March 13, 2015 at 15:23 >To: Phil Bedard, Nipa Kumar, "[email protected]" >Subject: Re: [Users] Issues installing Contrail 2.1 > >>/etc/ifmap-server/basicauthusers.properties >> >>It is mentioned here: >>https://github.com/Juniper/contrail-controller/wiki/OpenContrail-bring-up-and-provisioning >> >>________________________________________ >>From: Users <[email protected]> on behalf of Phil Bedard >><[email protected]> >>Sent: Friday, March 13, 2015 11:30 AM >>To: Nipa Kumar; [email protected] >>Subject: Re: [Users] Issues installing Contrail 2.1 >> >>So the issue seems to be related to contrail-control not being able to >>connect to the IFMap server. I see these in the ifmap-server.log. I can't >>remember ever setting a username/password. >> >>2015-03-13 14:27:26,394 [pool-6-thread-74] WARN - ChannelThread: >>Authentication on 10.4.7.75:52348:79136 failed: Bad username/password >>2015-03-13 14:27:26,395 [pool-6-thread-74] DEBUG - ChannelThread: >>10.4.7.75:52348:79136 closed >> >>Likewise I see these in the contrail-control log. >> >>2015-03-13 Fri 14:29:18:050.165 EDT contrail-main-1 [Thread 140324515297024, >>Pid 7963]: IFMapPeer [SYS_WARN]: IFMapServerConnection: Received 401 >>Unauthorized. Incorrect username/password. >>controller/src/ifmap/client/ifmap_channel.cc 642 >> >>Where is this username/password stored? >> >>Phil >> >> >> >> >> >>-----Original Message----- >>From: Nipa Kumar >>Date: Thursday, March 12, 2015 at 21:11 >>To: Phil Bedard, "[email protected]" >>Subject: Re: [Users] Issues installing Contrail 2.1 >> >>>Could u please send the output of /etc/contrail/contrail-vroute-agent.conf >>> >>> >>> >>>On 3/12/15 5:40 PM, "Phil Bedard" <[email protected]> wrote: >>> >>>>I'm installing Contrail in a test lab on three VMs, Ubuntu 14.04 on all >>>>the nodes. >>>> >>>>I've installed Contrail a couple times before in a similar setup and >>>>haven't had too many issues but this time nothing seems to work. I >>>>populated the testbed.py file with three nodes. One node acting as the >>>>main config/controller/etc. and then two compute nodes. The fab install >>>>and fab setup commands all completed with no issues, however when I go >>>>into the web UI, it shows the control node (running on the same node as >>>>the webui) and two vrouters as down. It also shows no config nodes or >>>>analytics nodes present. >>>> >>>>On the compute nodes I see the following in the vrouter agent logs on >>>>both hosts: >>>> >>>>2015-03-12 Thu 19:35:59:182.489 EDT contrail-compute-1 [Thread >>>>140269914363648, Pid 1602]: SANDESH: Send FAILED: 1426203359182474 >>>>[SYS_INFO]: XmppConnectionLog: connection= [ ip_address = 10.4.7.75 state >>>>= Connect event = Connect Event local_port = 39683 remote_port = >>>>4294967295 ] file = controller/src/xmpp/xmpp_state_machine.cc line = 1264 >>>>2015-03-12 Thu 19:35:59:182.641 EDT contrail-compute-1 [Thread >>>>140270072567680, Pid 1602]: SANDESH: Send FAILED: 1426203359182631 XMPP >>>>[SYS_NOTICE]: XmppEventLog: Mode Client: Event: Tcp Connect Fail >>>>peer: 10.4.7.75 controller/src/xmpp/xmpp_state_machine.cc 1051 >>>>2015-03-12 Thu 19:35:59:182.714 EDT contrail-compute-1 [Thread >>>>140269914363648, Pid 1602]: SANDESH: Send FAILED: 1426203359182704 >>>>[SYS_INFO]: XmppConnectionLog: connection= [ ip_address = 10.4.7.75 state >>>>= Connect next_state = Active event = EvTcpConnectFail ] file = >>>>controller/src/xmpp/xmpp_state_machine.cc line = 1264 >>>>2015-03-12 Thu 19:35:59:182.743 EDT contrail-compute-1 [Thread >>>>140269914363648, Pid 1602]: SANDESH: Send FAILED: 1426203359182736 >>>>[SYS_INFO]: XmppConnectionLog: connection= [ ip_address = 10.4.7.75 state >>>>= Active event = Connect failed after retries ] file = >>>>controller/src/xmpp/xmpp_state_machine.cc line = 1264 >>>>2015-03-12 Thu 19:36:02:792.498 EDT contrail-compute-1 [Thread >>>>140270072567680, Pid 1602]: SANDESH: Send FAILED: 1426203362792487 TCP >>>>[SYS_DEBUG]: TcpSessionMessageLog: Session >>>>10.4.7.76:52563::10.4.7.75:8086(-1) < Active session connection complete >>>>controller/src/io/tcp_session.cc 182 >>>>2015-03-12 Thu 19:36:10:794.678 EDT contrail-compute-1 [Thread >>>>140270072567680, Pid 1602]: SANDESH: Send FAILED: 1426203370794666 TCP >>>>[SYS_DEBUG]: TcpSessionMessageLog: Session >>>>10.4.7.76:52575::10.4.7.75:8086(-1) < Active session connection complete >>>>controller/src/io/tcp_session.cc 182 >>>> >>>> >>>> >>>>About the only thing that seems to work is the BGP peering session from >>>>the control node to an external MX. >>>> >>>>Any pointers? >>>> >>>>Thanks, >>>> >>>>Phil >>>> >>>> >>>> >>>>_______________________________________________ >>>>Users mailing list >>>>[email protected] >>>>http://lists.opencontrail.org/mailman/listinfo/users_lists.opencontrail.or >>>>g >>> >> >> >>_______________________________________________ >>Users mailing list >>[email protected] >>http://lists.opencontrail.org/mailman/listinfo/users_lists.opencontrail.org > _______________________________________________ Users mailing list [email protected] http://lists.opencontrail.org/mailman/listinfo/users_lists.opencontrail.org
