Yes I figured that out after looking at some of the files. I've decided to pass on Contrail for the time being until some of the install issues are sorted out. Using a clean Ubuntu 14.04.1, 14.04.2, and Centos 6.5 resulted in too many errors. The client nodes are setup with usernames/passwords to get to ifmap-server, but ifmap-server doesn't populate any of those names in its configuration.
Phil -----Original Message----- From: Pedro Marques Date: Friday, March 13, 2015 at 15:23 To: Phil Bedard, Nipa Kumar, "[email protected]" Subject: Re: [Users] Issues installing Contrail 2.1 >/etc/ifmap-server/basicauthusers.properties > >It is mentioned here: >https://github.com/Juniper/contrail-controller/wiki/OpenContrail-bring-up-and-provisioning > >________________________________________ >From: Users <[email protected]> on behalf of Phil Bedard ><[email protected]> >Sent: Friday, March 13, 2015 11:30 AM >To: Nipa Kumar; [email protected] >Subject: Re: [Users] Issues installing Contrail 2.1 > >So the issue seems to be related to contrail-control not being able to connect >to the IFMap server. I see these in the ifmap-server.log. I can't remember >ever setting a username/password. > >2015-03-13 14:27:26,394 [pool-6-thread-74] WARN - ChannelThread: >Authentication on 10.4.7.75:52348:79136 failed: Bad username/password >2015-03-13 14:27:26,395 [pool-6-thread-74] DEBUG - ChannelThread: >10.4.7.75:52348:79136 closed > >Likewise I see these in the contrail-control log. > >2015-03-13 Fri 14:29:18:050.165 EDT contrail-main-1 [Thread 140324515297024, >Pid 7963]: IFMapPeer [SYS_WARN]: IFMapServerConnection: Received 401 >Unauthorized. Incorrect username/password. >controller/src/ifmap/client/ifmap_channel.cc 642 > >Where is this username/password stored? > >Phil > > > > > >-----Original Message----- >From: Nipa Kumar >Date: Thursday, March 12, 2015 at 21:11 >To: Phil Bedard, "[email protected]" >Subject: Re: [Users] Issues installing Contrail 2.1 > >>Could u please send the output of /etc/contrail/contrail-vroute-agent.conf >> >> >> >>On 3/12/15 5:40 PM, "Phil Bedard" <[email protected]> wrote: >> >>>I'm installing Contrail in a test lab on three VMs, Ubuntu 14.04 on all >>>the nodes. >>> >>>I've installed Contrail a couple times before in a similar setup and >>>haven't had too many issues but this time nothing seems to work. I >>>populated the testbed.py file with three nodes. One node acting as the >>>main config/controller/etc. and then two compute nodes. The fab install >>>and fab setup commands all completed with no issues, however when I go >>>into the web UI, it shows the control node (running on the same node as >>>the webui) and two vrouters as down. It also shows no config nodes or >>>analytics nodes present. >>> >>>On the compute nodes I see the following in the vrouter agent logs on >>>both hosts: >>> >>>2015-03-12 Thu 19:35:59:182.489 EDT contrail-compute-1 [Thread >>>140269914363648, Pid 1602]: SANDESH: Send FAILED: 1426203359182474 >>>[SYS_INFO]: XmppConnectionLog: connection= [ ip_address = 10.4.7.75 state >>>= Connect event = Connect Event local_port = 39683 remote_port = >>>4294967295 ] file = controller/src/xmpp/xmpp_state_machine.cc line = 1264 >>>2015-03-12 Thu 19:35:59:182.641 EDT contrail-compute-1 [Thread >>>140270072567680, Pid 1602]: SANDESH: Send FAILED: 1426203359182631 XMPP >>>[SYS_NOTICE]: XmppEventLog: Mode Client: Event: Tcp Connect Fail >>>peer: 10.4.7.75 controller/src/xmpp/xmpp_state_machine.cc 1051 >>>2015-03-12 Thu 19:35:59:182.714 EDT contrail-compute-1 [Thread >>>140269914363648, Pid 1602]: SANDESH: Send FAILED: 1426203359182704 >>>[SYS_INFO]: XmppConnectionLog: connection= [ ip_address = 10.4.7.75 state >>>= Connect next_state = Active event = EvTcpConnectFail ] file = >>>controller/src/xmpp/xmpp_state_machine.cc line = 1264 >>>2015-03-12 Thu 19:35:59:182.743 EDT contrail-compute-1 [Thread >>>140269914363648, Pid 1602]: SANDESH: Send FAILED: 1426203359182736 >>>[SYS_INFO]: XmppConnectionLog: connection= [ ip_address = 10.4.7.75 state >>>= Active event = Connect failed after retries ] file = >>>controller/src/xmpp/xmpp_state_machine.cc line = 1264 >>>2015-03-12 Thu 19:36:02:792.498 EDT contrail-compute-1 [Thread >>>140270072567680, Pid 1602]: SANDESH: Send FAILED: 1426203362792487 TCP >>>[SYS_DEBUG]: TcpSessionMessageLog: Session >>>10.4.7.76:52563::10.4.7.75:8086(-1) < Active session connection complete >>>controller/src/io/tcp_session.cc 182 >>>2015-03-12 Thu 19:36:10:794.678 EDT contrail-compute-1 [Thread >>>140270072567680, Pid 1602]: SANDESH: Send FAILED: 1426203370794666 TCP >>>[SYS_DEBUG]: TcpSessionMessageLog: Session >>>10.4.7.76:52575::10.4.7.75:8086(-1) < Active session connection complete >>>controller/src/io/tcp_session.cc 182 >>> >>> >>> >>>About the only thing that seems to work is the BGP peering session from >>>the control node to an external MX. >>> >>>Any pointers? >>> >>>Thanks, >>> >>>Phil >>> >>> >>> >>>_______________________________________________ >>>Users mailing list >>>[email protected] >>>http://lists.opencontrail.org/mailman/listinfo/users_lists.opencontrail.or >>>g >> > > >_______________________________________________ >Users mailing list >[email protected] >http://lists.opencontrail.org/mailman/listinfo/users_lists.opencontrail.org _______________________________________________ Users mailing list [email protected] http://lists.opencontrail.org/mailman/listinfo/users_lists.opencontrail.org
