Dear Matic I repeated the steps as: First I removed cygwin fully and installed it again. Then
1. installed everything as you mentioned. 2. Issued the command XWin :0 -clipboard -multiwindow & xterm & 3. Open another cygwin terminal and issued ./xcrysden from xcrysden top directory. 4. But no luck. Still giving the same issue. Thanks. On Sat, Jul 22, 2017 at 10:37 PM, Matic Poberžnik <[email protected] > wrote: > Dear Rajesh, > > I just installed it on my system and it seems to work (Windows 7 but I > think there shouldn't be much difference): > > First I installed the dependencies: > > apt-cyg install libGL1 libGLU1 xorg-server bash bc coreutils gawk > grep gzip ImageMagick less libgfortran3 xterm > > > (libgfortran3 is needed to avoid some errors) > Then I started x by typing (I get similar messages than you but they > shouldn't be anything to worry about): > > XWin :0 -clipboard -multiwindow & > xterm & > > This started the xterm, from which I was then able to run from the top > install directory xcrysden (~/xcrysden-1.5.60-bin-shared/). > > ./xcrysden > > So in the end I am unable to reproduce your problem, could you try these > steps and let me know how it goes? > > Best Regards, > > Matic Poberznik > J. Stefan Institute, Jamova 39, 1000 Ljubljana, Slovenia > > > > 2017-07-22 15:41 GMT+02:00 Rajesh <[email protected]>: > >> Dear Matic >> Its not starting even from xterminal. When I start startx I get some >> errors >> (II) xorg.conf is not supported >> and LoadPreferences: /home/RAMJI/.XWinrc not found >> >> >> On Sat, Jul 22, 2017 at 7:31 PM, Matic Poberznik < >> [email protected]> wrote: >> >>> >>> >>> > But dont get any xcrysden window. >>> >>> I'm not sure it seems everything should be ok. Are you sure you started >>> it from the xterminal? >>> i.e. after typing startx a new terminal should appear, and xcrysden >>> should work from there. >>> >>> >>> Best Regards, >>> >>> Matic >>> -- >>> Matic Poberznik >>> J. Stefan Institute, Jamova 39, 1000 Ljubljana, Slovenia >>> >> >> >
_______________________________________________ Pw_forum mailing list [email protected] http://pwscf.org/mailman/listinfo/pw_forum
