Dear Rajesh, Here is a easy tutorial on youtube using putty in windows and x-windows ( https://www.youtube.com/watch?v=NNuXpk10zXE) for your reference. I think it can help you set up the environment of x-windows (as well as xcrysden) in your windows 8.1.
Bests FANG 2017-07-23 17:36 GMT+08:00 Rajesh <[email protected]>: > Dear Fang, > > Thank you for your response. Can you give some details how to access it on > my windows pc from cluster. > > On Sun, Jul 23, 2017 at 2:57 PM, Yue-Wen Fang <[email protected]> > wrote: > >> Actually you don't need install Cygwin, its package is so large and I can >> guarantee 99% of its functionality won't be used in all of our life. >> Alternatively, you just need install Xcrysden in the account of >> superconducting center or cluster, and then install a X-windows in your >> windows 8.1 (please google it and you will find many tools). >> >> Bests >> FANG >> >> 2017-07-23 16:58 GMT+08:00 Matic Poberžnik <[email protected]>: >> >>> The issue is in the tcl version you should install tcl8.5 but apt-cyg >>> installs 8.6 ( that was my mistake sorry). I solved this by going to the >>> original cygwin installation executable, running it and then searching for >>> tcl string. It should be listed as installed, if you click a few times >>> version 8.5 should appear, after i installed this it worked. Again sorry >>> for the mistake as for the other machine I don't know where the problem >>> lies. >>> >>> Best Regards, >>> >>> Matic >>> >>> 2017-07-23 8:43 GMT+02:00 Rajesh <[email protected]>: >>> >>>> Dear Matic >>>> I also tried the same procedure on other pc but I am getting error >>>> libtcl8.5.dll not found. Installling how can I install libtcl8.5. I have >>>> installed tcl-tk8.5 package but no libtcl8.5 file is there in cygwin >>>> directory, instead there is libtcl8.6. Where I can find libtcl8.5.dll? >>>> >>>> On Sun, Jul 23, 2017 at 9:07 AM, Rajesh <[email protected]> >>>> wrote: >>>> >>>>> Dear Matic >>>>> I repeated the steps as: >>>>> First I removed cygwin fully and installed it again. Then >>>>> >>>>> 1. installed everything as you mentioned. >>>>> 2. Issued the command XWin :0 -clipboard -multiwindow & xterm & >>>>> 3. Open another cygwin terminal and issued ./xcrysden from xcrysden >>>>> top directory. >>>>> 4. But no luck. Still giving the same issue. >>>>> >>>>> Thanks. >>>>> >>>>> >>>>> On Sat, Jul 22, 2017 at 10:37 PM, Matic Poberžnik < >>>>> [email protected]> wrote: >>>>> >>>>>> Dear Rajesh, >>>>>> >>>>>> I just installed it on my system and it seems to work (Windows 7 but >>>>>> I think there shouldn't be much difference): >>>>>> >>>>>> First I installed the dependencies: >>>>>> >>>>>> apt-cyg install libGL1 libGLU1 xorg-server bash bc coreutils gawk >>>>>> grep gzip ImageMagick less libgfortran3 xterm >>>>>> >>>>>> >>>>>> (libgfortran3 is needed to avoid some errors) >>>>>> Then I started x by typing (I get similar messages than you but they >>>>>> shouldn't be anything to worry about): >>>>>> >>>>>> XWin :0 -clipboard -multiwindow & >>>>>> xterm & >>>>>> >>>>>> This started the xterm, from which I was then able to run from the >>>>>> top install directory xcrysden (~/xcrysden-1.5.60-bin-shared/). >>>>>> >>>>>> ./xcrysden >>>>>> >>>>>> So in the end I am unable to reproduce your problem, could you try >>>>>> these steps and let me know how it goes? >>>>>> >>>>>> Best Regards, >>>>>> >>>>>> Matic Poberznik >>>>>> J. Stefan Institute, Jamova 39, 1000 Ljubljana, Slovenia >>>>>> >>>>>> >>>>>> >>>>>> 2017-07-22 15:41 GMT+02:00 Rajesh <[email protected]>: >>>>>> >>>>>>> Dear Matic >>>>>>> Its not starting even from xterminal. When I start startx I get >>>>>>> some errors >>>>>>> (II) xorg.conf is not supported >>>>>>> and LoadPreferences: /home/RAMJI/.XWinrc not found >>>>>>> >>>>>>> >>>>>>> On Sat, Jul 22, 2017 at 7:31 PM, Matic Poberznik < >>>>>>> [email protected]> wrote: >>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> > But dont get any xcrysden window. >>>>>>>> >>>>>>>> I'm not sure it seems everything should be ok. Are you sure you >>>>>>>> started >>>>>>>> it from the xterminal? >>>>>>>> i.e. after typing startx a new terminal should appear, and xcrysden >>>>>>>> should work from there. >>>>>>>> >>>>>>>> >>>>>>>> Best Regards, >>>>>>>> >>>>>>>> Matic >>>>>>>> -- >>>>>>>> Matic Poberznik >>>>>>>> J. Stefan Institute, Jamova 39, 1000 Ljubljana, Slovenia >>>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>> >>> _______________________________________________ >>> Pw_forum mailing list >>> [email protected] >>> http://pwscf.org/mailman/listinfo/pw_forum >>> >> >> >> >> -- >> ------------------------------------------------------------ >> ------------------------------------------------ >> Visiting academic, New York University Shanghai >> <https://shanghai.nyu.edu/>, China >> Phone: +86-18657193156 <186%205719%203156> >> Skype: Yue-Wen FANG >> Email: [email protected]; [email protected] >> >> >> >> > -- ------------------------------------------------------------------------------------------------------------ Visiting academic, New York University Shanghai <https://shanghai.nyu.edu/>, China Phone: +86-18657193156 <186%205719%203156> Skype: Yue-Wen FANG Email: [email protected]; [email protected]
_______________________________________________ Pw_forum mailing list [email protected] http://pwscf.org/mailman/listinfo/pw_forum
