Steve, Thanks, this worked really well. I managed to update one of the phones, at least to a certain point. It downloaded the new image and read at least part of the configuration file. It is now sitting at the "Phone Unprovisioned" state. The only problem I have now is that, to complete the provisioning, I can't seem to get the Network Configuration unlocked. The old method of hitting **# doesn't seem to work any more.
Thanks again, Scott Yagel PacketCall, Inc. [EMAIL PROTECTED] -----Original Message----- From: Stephen Varga [mailto:[EMAIL PROTECTED] Sent: Wednesday, February 21, 2007 11:38 AM To: [EMAIL PROTECTED] Cc: [email protected] Subject: Re: [Users] Cisco 7960 phones Scott, Put the attached files into your tftp server that the phones are pulling their configs and image from. You should also have the following image files in the same tftp server: P003-08-2-00.bin P0S3-08-2-00.loads P0S3-08-2-00.zip P003-08-2-00.sbn P0S3-08-2-00.sb2 I have used these files to successfully upgrade phones. If you have SIPxxxxxxxxxxxx.cnf file created for the phones, make sure the image_version line is commented out. The biggest problem I have with this version is using that it reads the dialplan.xml file but it does not work; I am guessing there is a syntax change but can not been able to find SIP documentation related to the 8.2 code on Cisco's website. I have been staying with the 7.5 version of the code because of this problem. I found watching which files are being requested by phone a big help in getting the loads to work properly Let me know what happens. Steve _______________________________________________ Users mailing list [email protected] http://openser.org/cgi-bin/mailman/listinfo/users
