On 01/17/2014 11:38 PM, William Kwan wrote:
OK.. tested with bond0.102 for vlan102 I guess I can't do this with oVirt? It wouldn't pickup this interface. It still shows up eth0, eth1 and bond0 only
you tried to define a vlan youself on the bond, or use a vlan via a logical network over the bond via ovirt-engine (which should work)?
Will On Friday, January 17, 2014 1:15 PM, William Kwan <pota...@yahoo.com> wrote: Thanks all for the info. I'm trying the suggestions with 3.3.2-1.el6 Assaf mentioned the following which is true. You can make ovirtmgmt a non-VM, untagged (non-VLAN) network, then place as many VM, tagged networks as you'd like on the same NIC or bond. I tried a few things and I haven't been able to find a way through. Obviously or not, there are more facts/rules. Just put up a few of them here Cannot have more than one non-VLAN network on one interface Cannot have a non-VLAN VM network and VLAN-tagged networks on one interface. ( got this when I tried to drag a VLAN-tagged VM network on the same interface as the non-VLAN VM network). I'll try to test adding a bond0.<vlan>. I need to have bond0 - for both mgmt network and a vlan bond1 - for another subnet. Will On Thursday, January 16, 2014 1:50 PM, Juan Pablo Lorier <jplor...@gmail.com> wrote: Hi William, You can have several logical networks on the same interface. If ovirtmgmt is not a vm network you can even mix tagged and untagged networks (if not, you can't mix). You don's have to do anything besides creating the logical networks in ovirt and assign them to the interface, ovirt takes care of creating the virtual interfaces it needs. What you can't do is have more than one logical network per vlan (I think there's a feature request on this, I know I've asked it on the list:-) ). Regards, _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
