So I got ovirtmgmt VM ticked off. Had to remove it from all VM's then tried to add new Logical network to eth0 by drag & drop but refused since ovirtmgmt was out of sync. So I synced it. ....and that's how I lost access to my hosted remote system. End of story. So that's it I guess, automated install doesn't work (during switch network goes dead and doesn't come back remote access is lost) so I found manual way that works. But then I need to sync it to get my ovirtmgmt not to be a VM network. And even if its not to get another network on the interface i need to sync it.....
I will keep trying, Thanks for the tips. P. On 17 January 2014 22:06, Itamar Heim <ih...@redhat.com> wrote: > On 01/18/2014 12:05 AM, William Kwan wrote: > >> I tried to define a virtual interface for vlan102, by >> adding ifcfg-bond0.102 >> manually and restarted network services. >> > > why not via ovirt-engine? > > >> >> >> >> On Friday, January 17, 2014 4:45 PM, Itamar Heim <ih...@redhat.com> >> wrote: >> On 01/17/2014 11:38 PM, William Kwan wrote: >> > OK.. tested with bond0.102 for vlan102 >> > I guess I can't do this with oVirt? It wouldn't pickup this interface. >> > It still shows up eth0, eth1 and bond0 only >> >> you tried to define a vlan youself on the bond, or use a vlan via a >> logical network over the bond via ovirt-engine (which should work)? >> >> >> > >> > Will >> > >> > >> > >> > On Friday, January 17, 2014 1:15 PM, William Kwan <pota...@yahoo.com >> <mailto:pota...@yahoo.com>> wrote: >> > Thanks all for the info. I'm trying the suggestions with 3.3.2-1.el6 >> > >> > Assaf mentioned the following which is true. >> > You can make ovirtmgmt a non-VM, untagged (non-VLAN) network, then >> place >> > as many VM, tagged networks as you'd like on the same NIC or bond. >> > >> > I tried a few things and I haven't been able to find a way through. >> > Obviously or not, there are more facts/rules. Just put up a few of >> them >> > here >> > >> > Cannot have more than one non-VLAN network on one interface >> > Cannot have a non-VLAN VM network and VLAN-tagged networks on one >> > interface. ( got this when I tried to drag a VLAN-tagged VM network on >> > the same interface as the non-VLAN VM network). >> > >> > I'll try to test adding a bond0.<vlan>. I need to have >> > bond0 - for both mgmt network and a vlan >> > bond1 - for another subnet. >> > >> > Will >> > >> > >> > >> > >> > On Thursday, January 16, 2014 1:50 PM, Juan Pablo Lorier >> > <jplor...@gmail.com <mailto:jplor...@gmail.com>> wrote: >> > Hi William, >> > >> > You can have several logical networks on the same interface. If >> > ovirtmgmt is not a vm network you can even mix tagged and untagged >> > networks (if not, you can't mix). You don's have to do anything besides >> > creating the logical networks in ovirt and assign them to the >> interface, >> > ovirt takes care of creating the virtual interfaces it needs. >> > What you can't do is have more than one logical network per vlan (I >> > think there's a feature request on this, I know I've asked it on the >> > >> > list:-) ). >> > Regards, >> >> > >> > >> > >> > >> > >> > >> > >> > _______________________________________________ >> > Users mailing list >> > Users@ovirt.org <mailto:Users@ovirt.org> >> > http://lists.ovirt.org/mailman/listinfo/users >> >> > >> >> >> >> > _______________________________________________ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users >
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users