Let us know how it works out, I am curious to see if having a untagged and tagged interface on the same bridge was an issue. On Jun 30, 2015 10:21 PM, "Julián Tete" <danteconra...@gmail.com> wrote:
> Thanks Donny, Tomorrow I'm going to try this. :) > > 2015-06-30 21:12 GMT-05:00 Donny Davis <do...@cloudspin.me>: > >> That tells me that there is a tagging issue between the host and the >> switch. >> Untagged traffic flows without issue via the same interface as tagged >> traffic. >> As a personal best practice I separate access ports(untagged) and trunk >> ports (tagged) traffic on different physical ports. >> Can you setup a separate phys interface for the tagged traffic, or must >> you be able to pass both on the same interface. >> On Jun 30, 2015 10:05 PM, "Julián Tete" <danteconra...@gmail.com> wrote: >> >>> My mgmt network works wonderfully, Virtual Machines created on the mgmt >>> even can reach Internet. But my company wants the traffic separated. >>> >>> Thanks Donny, I'm a RHCSA from Colombia, but I'm learning about oVirt. >>> (oVirt is a new thing in my country) >>> >>> P.S : I want to put VMware in the Trash Can too. ^_ ^ >>> >>> 2015-06-30 20:59 GMT-05:00 Donny Davis <do...@cloudspin.me>: >>> >>>> There is a special place in my DC for vmware. TrashCan...lol >>>> On Jun 30, 2015 9:50 PM, "Julián Tete" <danteconra...@gmail.com> wrote: >>>> >>>>> I'm going to check it out... but how the host can reach the Gateway >>>>> and the Virtual Machine inside doesn't ? >>>>> >>>>> Donny you are very kind, this the last step to free my DataCenter from >>>>> VMware. >>>>> >>>>> 2015-06-30 20:46 GMT-05:00 Donny Davis <do...@cloudspin.me>: >>>>> >>>>>> Does your switch have an IP on that vlan... I would step things out >>>>>> VM>host>switch>rtr >>>>>> >>>>>> You have already confirmed VM to host. >>>>>> >>>>>> I'm going to look at your screens again to make sure I didn't miss >>>>>> anything >>>>>> On Jun 30, 2015 9:42 PM, "Julián Tete" <danteconra...@gmail.com> >>>>>> wrote: >>>>>> >>>>>>> Thanks for the explanation :) >>>>>>> >>>>>>> I set everything of the VLANs at oVirt, After I put a IP on the >>>>>>> Virtual Machine. But the Virtual Machine can't reach the gateway, The >>>>>>> host >>>>>>> can do. The Virtual Machine only can reach the host. All the machines of >>>>>>> the range of net can reach the Virtual Machine. >>>>>>> >>>>>>> 2015-06-30 20:36 GMT-05:00 Donny Davis <do...@cloudspin.me>: >>>>>>> >>>>>>>> I'm asking if your setting the vlan on the VM or at ovirt. >>>>>>>> >>>>>>>> More than likely if you are coming from VMware you have the Vlans >>>>>>>> set at the hypervisor. This does work in ovirt, I am doing it right now >>>>>>>> On Jun 30, 2015 9:31 PM, "Julián Tete" <danteconra...@gmail.com> >>>>>>>> wrote: >>>>>>>> >>>>>>>>> Mmmm I'm new in oVirt :( >>>>>>>>> >>>>>>>>> VMs Interface is Virtual MachineS Interface or VM Network >>>>>>>>> Interface in the host ? >>>>>>>>> >>>>>>>>> I configured the IP of the VLAN in the host. >>>>>>>>> >>>>>>>>> I double check: the NIC of the Host has the VLAN assigned. >>>>>>>>> >>>>>>>>> Can you help me ? >>>>>>>>> >>>>>>>>> 2015-06-30 20:11 GMT-05:00 Donny Davis <do...@cloudspin.me>: >>>>>>>>> >>>>>>>>>> Are you configuring the vms interface with the vlan or tagging at >>>>>>>>>> the host. >>>>>>>>>> On Jun 30, 2015 7:28 PM, "Julián Tete" <danteconra...@gmail.com> >>>>>>>>>> wrote: >>>>>>>>>> >>>>>>>>>>> Hi Donny >>>>>>>>>>> >>>>>>>>>>> We have HP Switches (HP 5406zl) and they are configurated on >>>>>>>>>>> trunk mode. (VMware is configurated to use that). >>>>>>>>>>> >>>>>>>>>>> Any suggestion ? >>>>>>>>>>> >>>>>>>>>>> Thanks for your response. >>>>>>>>>>> >>>>>>>>>>> :) >>>>>>>>>>> >>>>>>>>>>> 2015-06-30 17:51 GMT-05:00 Donny Davis <do...@cloudspin.me>: >>>>>>>>>>> >>>>>>>>>>>> Vlans are layer 2, sounds like a tagging problem. Cisco >>>>>>>>>>>> switches? The tag sticks to the host bridge, but is being stripped >>>>>>>>>>>> off when >>>>>>>>>>>> it leaves the host.... Is your switch in access mode or trunk? >>>>>>>>>>>> Hi Friends of oVirt >>>>>>>>>>>> >>>>>>>>>>>> I'm trying to migrate my company from VMware to oVirt. >>>>>>>>>>>> In my final tests, I set up 2 more VLANs in oVirt, (VM VLANs) >>>>>>>>>>>> The Virtual Machines in these VLANs, can be reached from the >>>>>>>>>>>> external IPs from the net range, >>>>>>>>>>>> but from the Virtual machines only can ping the Host with the >>>>>>>>>>>> Bridge and itself, can't reach the gateway. ¿? >>>>>>>>>>>> >>>>>>>>>>>> I configured a IP Forwarding in the Host with the virtual >>>>>>>>>>>> machine, and nothing changes... >>>>>>>>>>>> >>>>>>>>>>>> Any idea ? This is the last duty before embrace oVirt in the >>>>>>>>>>>> company. >>>>>>>>>>>> >>>>>>>>>>>> Look to the VLAN 100 configuration (My desired VM Network): >>>>>>>>>>>> >>>>>>>>>>>> http://postimg.org/image/7hrog0a2n/ >>>>>>>>>>>> >>>>>>>>>>>> http://postimg.org/image/68b40i1vr/ >>>>>>>>>>>> >>>>>>>>>>>> http://postimg.org/image/lu6mlshgp/ >>>>>>>>>>>> >>>>>>>>>>>> http://postimg.org/image/540o1qc0t/ >>>>>>>>>>>> >>>>>>>>>>>> http://postimg.org/image/4kyg787bt/ >>>>>>>>>>>> >>>>>>>>>>>> http://postimg.org/image/v7ralh7zb/ >>>>>>>>>>>> >>>>>>>>>>>> http://postimg.org/image/kn903cl03/ >>>>>>>>>>>> >>>>>>>>>>>> For any idea, thanks in advance >>>>>>>>>>>> >>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>> Users mailing list >>>>>>>>>>>> Users@ovirt.org >>>>>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>> >>>>>>> >>>>> >>> >
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users