On Wed, Jun 3, 2020 at 4:30 PM Gianluca Cecchi
<gianluca.cec...@gmail.com> wrote:
>
> On Mon, May 25, 2020 at 8:50 AM Yedidyah Bar David <d...@redhat.com> wrote:
>>
>> On Sun, May 24, 2020 at 9:36 PM Gianluca Cecchi
>> <gianluca.cec...@gmail.com> wrote:
>> >
>> > On Sun, May 24, 2020 at 11:47 AM Yedidyah Bar David <d...@redhat.com>
>> > wrote:
>> >>
>> >>
>> >>
>> >> Hi, Gianluca. Replying to your email on "4.4 HCI Install Failure -
>> >> Missing /etc/pki/CA/cacert.pem":
>> >>
>> >> On Sun, May 24, 2020 at 12:28 PM Gianluca Cecchi
>> >> <gianluca.cec...@gmail.com> wrote:
>> >> >
>> >> > I I remember correctly it happened to me during the beta cycle and the
>> >> > only "strange" character I used for the admin password was the @
>> >> > Donna if it related with what you reported for the % character
>> >>
>> >> Did you open a bug?
>> >>
>> >> In any case, my above patch is not supposed to fix '@', only '%' (I
>> >> think).
>> >>
>> >> Thanks and best regards,
>> >>
>> >
>> > No, I didn't open a bug, because I scratched the system and installed
>> > again this time without the error, but I don't remember if I used the same
>> > password with the @ character or not....
>> > I will put attention in case of future 4.4 new installations
>>
>> Very well, thanks :-)
>> --
>> Didi
>
>
>
> Just to avoid opening a bug for a different thing, today I tried a single
> host HCI setup with the wizard and it failed.
> Installed from ovirt-node-ng final 4.4 iso.
> I see I have no /etc/pki/CA directory on the host at the moment, but I don't
> know if the install workflow had not arrived there yet or what.
> Last lines in my wizard window are these ones below.
> Password used contains only letters, numbers and the "_" character in this
> attempt
> I'm in the "Prepare VM" stage.
>
> [ INFO ] TASK [ovirt.hosted_engine_setup : Stop libvirt service]
> [ INFO ] changed: [localhost]
> [ INFO ] TASK [ovirt.hosted_engine_setup : Drop vdsm config statements]
> [ INFO ] changed: [localhost]
> [ INFO ] TASK [ovirt.hosted_engine_setup : Restore initial abrt config files]
> [ INFO ] changed: [localhost]
> [ INFO ] TASK [ovirt.hosted_engine_setup : Restart abrtd service]
> [ INFO ] changed: [localhost]
> [ INFO ] TASK [ovirt.hosted_engine_setup : Drop libvirt sasl2 configuration
> by vdsm]
> [ INFO ] changed: [localhost]
> [ INFO ] TASK [ovirt.hosted_engine_setup : Stop and disable services]
> [ INFO ] ok: [localhost]
> [ INFO ] TASK [ovirt.hosted_engine_setup : Restore initial libvirt default
> network configuration]
> [ INFO ] changed: [localhost]
> [ INFO ] TASK [ovirt.hosted_engine_setup : Start libvirt]
> [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "Unable to
> start service libvirtd: Job for libvirtd.service failed because the control
> process exited with error code.\nSee \"systemctl status libvirtd.service\"
> and \"journalctl -xe\" for details.\n"}
>
> Status of libvirtd service is this one:
>
> [root@ovirt01 g.cecchi]# systemctl status libvirtd -l --no-pager
> ● libvirtd.service - Virtualization daemon
> Loaded: loaded (/usr/lib/systemd/system/libvirtd.service; enabled; vendor
> preset: enabled)
> Drop-In: /etc/systemd/system/libvirtd.service.d
> └─unlimited-core.conf
> Active: failed (Result: exit-code) since Wed 2020-06-03 15:13:35 CEST;
> 7min ago
> Docs: man:libvirtd(8)
> https://libvirt.org
> Process: 20001 ExecStart=/usr/sbin/libvirtd $LIBVIRTD_ARGS (code=exited,
> status=6)
> Main PID: 20001 (code=exited, status=6)
> Tasks: 2 (limit: 32768)
> Memory: 70.1M
> CGroup: /system.slice/libvirtd.service
> ├─3926 /usr/sbin/dnsmasq
> --conf-file=/var/lib/libvirt/dnsmasq/default.conf --leasefile-ro
> --dhcp-script=/usr/libexec/libvirt_leaseshelper
> └─3927 /usr/sbin/dnsmasq
> --conf-file=/var/lib/libvirt/dnsmasq/default.conf --leasefile-ro
> --dhcp-script=/usr/libexec/libvirt_leaseshelper
>
> Jun 03 15:13:35 ovirt01.mydomain.local systemd[1]: libvirtd.service: Service
> RestartSec=100ms expired, scheduling restart.
> Jun 03 15:13:35 ovirt01.mydomain.local systemd[1]: libvirtd.service:
> Scheduled restart job, restart counter is at 5.
> Jun 03 15:13:35 ovirt01.mydomain.local systemd[1]: Stopped Virtualization
> daemon.
> Jun 03 15:13:35 ovirt01.mydomain.local systemd[1]: libvirtd.service: Start
> request repeated too quickly.
This looks simply like libvirt was restarted too much too quickly. Did
you restart it yourself before deploy?
If not, and it's only due to the deploy process restarting it, then either:
1. That's ok, and we should simply configure systemd to allow that,
2. or there is some other problem, and restarting libvirt is just a symptom.
> Jun 03 15:13:35 ovirt01.mydomain.local systemd[1]: libvirtd.service: Failed
> with result 'exit-code'.
> Jun 03 15:13:35 ovirt01.mydomain.local systemd[1]: Failed to start
> Virtualization daemon.
> [root@ovirt01 g.cecchi]#
>
> Let me know what files do you want to analyze the problem
> Under /var/log/ovirt-hosted-engine-setup I have:
>
> [root@ovirt01 ovirt-hosted-engine-setup]# ls -lrt
> total 632
> -rw-r--r--. 1 root root 123814 Jun 3 15:07
> ovirt-hosted-engine-setup-ansible-get_network_interfaces-20205315737-ooohyb.log
> -rw-r--r--. 1 root root 126674 Jun 3 15:08
> ovirt-hosted-engine-setup-ansible-validate_hostnames-20205315737-oqixuw.log
> -rw-r--r--. 1 root root 127548 Jun 3 15:10
> ovirt-hosted-engine-setup-ansible-validate_hostnames-202053151022-yls4qo.log
> -rw-r--r--. 1 root root 261482 Jun 3 15:13
> ovirt-hosted-engine-setup-ansible-initial_clean-20205315123-7x25zv.log
> [root@ovirt01 ovirt-hosted-engine-setup]#
Perhaps check these for libvirt restarts, also /var/log/messages (or
journalctl).
Do you see there other errors?
>
> In this environment no dns but entry in /etc/hosts of the server.
> Host is on 192.168.1.x on eno1 and a vlan 100 on the same interface, used for
> "simulated" storage network
For now, I'd assume that's not related, but can't be sure.
Thanks and best regards,
--
Didi
_______________________________________________
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/5SJ6LHJHFSSPU6XQEJROCYJD5AOJJDD3/
