NFS utilize the network adapter, am I right? The LAN port max speed on the 
storage is just 100Mb/s. That's too slow for hosting VMs.
Regards,Jeremy

    2020年8月8日土曜日 2:15:08 GMT+8、Strahil Nikolov via Users 
<users@ovirt.org>が書いたメール:  
 
 Do  you have the option for POSIX compliant FS ?
If not,  I guess the simplest way is to setup NFS export that to be used for 
the engine.

Best  Regards,
Strahil Nikolov

На 7 август 2020 г. 15:59:55 GMT+03:00, Lao Dh via Users <users@ovirt.org> 
написа:
>Hello Strahil,I follow the guide in "Installing oVirt as a self-hosted
>engine using the Cockpit web interface". Only 1 host and 1 SAS storage.
>Host and storage are direct attached. CentOS 8 was installed in host
>local disk.Only 1 SAS cable connected. So I think shouldn't be the
>issue of Multipath.
>
>Regards,Jeremy
>
>
>
>
>
>2020年8月7日金曜日 20:37:47 GMT+8、Strahil Nikolov
><hunter86...@yahoo.com>が書いたメール:  
> 
> Are you using the single-node wizard  ?
>
>Best Regards,
>Strahil Nikolov
>
>На 7 август 2020 г. 11:34:52 GMT+03:00, hkexdong--- via Users
><users@ovirt.org> написа:
>>I've an external RAID subsystem connect to the host by SAS cable
>>(SFF-8644).
>>I follow the instructions of the RAID card manufacture. Include the
>>driver during host installation. And I can see the created RAID
>volumes
>>(LUNs) available in "Installation Destination". Although I choose to
>>install the engine in host local disk.
>>The installation success and I proceed to hosted engine deployment by
>>Cockpit. And now I stuck at part 4 Storage.
>>I believe "Storage Type" select "Fibre Channel" is correct even I'm
>not
>>using fibre cable. As NFS and iSCSI are utilize network.
>>I confirm there are 2 RAID volume (LUN0 & LUN1) created in the
>external
>>RAID subsystem. Why oVirt cannot discover them. What could be wrong :(
>>_______________________________________________
>>Users mailing list -- users@ovirt.org
>>To unsubscribe send an email to users-le...@ovirt.org
>>Privacy Statement: https://www.ovirt.org/privacy-policy.html
>>oVirt Code of Conduct:
>>https://www.ovirt.org/community/about/community-guidelines/
>>List Archives:
>>https://lists.ovirt.org/archives/list/users@ovirt.org/message/IIMW6VBS4JBL5WJFTS7AWDS5ENQDB63Y/
> 
_______________________________________________
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/5WYU5SRXKGYDTTLA5WOMYZQULXP4OGLN/
  
_______________________________________________
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/TITOLTY5YV5BRN63ZUVRM22YJ2MSKZXF/

Reply via email to