Not when both client and server is the same node and you use "localhost:/nfs-share"
Best Regards, Strahil Nikolov В събота, 8 август 2020 г., 05:56:10 Гринуич+3, Lao Dh <[email protected]> написа: NFS utilize the network adapter, am I right? The LAN port max speed on the storage is just 100Mb/s. That's too slow for hosting VMs. Regards, Jeremy 2020年8月8日土曜日 2:15:08 GMT+8、Strahil Nikolov via Users <[email protected]>が書いたメール: Do you have the option for POSIX compliant FS ? If not, I guess the simplest way is to setup NFS export that to be used for the engine. Best Regards, Strahil Nikolov На 7 август 2020 г. 15:59:55 GMT+03:00, Lao Dh via Users <[email protected]> написа: >Hello Strahil,I follow the guide in "Installing oVirt as a self-hosted >engine using the Cockpit web interface". Only 1 host and 1 SAS storage. >Host and storage are direct attached. CentOS 8 was installed in host >local disk.Only 1 SAS cable connected. So I think shouldn't be the >issue of Multipath. > >Regards,Jeremy > > > > > >2020年8月7日金曜日 20:37:47 GMT+8、Strahil Nikolov ><[email protected]>が書いたメール: > > Are you using the single-node wizard ? > >Best Regards, >Strahil Nikolov > >На 7 август 2020 г. 11:34:52 GMT+03:00, hkexdong--- via Users ><[email protected]> написа: >>I've an external RAID subsystem connect to the host by SAS cable >>(SFF-8644). >>I follow the instructions of the RAID card manufacture. Include the >>driver during host installation. And I can see the created RAID >volumes >>(LUNs) available in "Installation Destination". Although I choose to >>install the engine in host local disk. >>The installation success and I proceed to hosted engine deployment by >>Cockpit. And now I stuck at part 4 Storage. >>I believe "Storage Type" select "Fibre Channel" is correct even I'm >not >>using fibre cable. As NFS and iSCSI are utilize network. >>I confirm there are 2 RAID volume (LUN0 & LUN1) created in the >external >>RAID subsystem. Why oVirt cannot discover them. What could be wrong :( >>_______________________________________________ >>Users mailing list -- [email protected] >>To unsubscribe send an email to [email protected] >>Privacy Statement: https://www.ovirt.org/privacy-policy.html >>oVirt Code of Conduct: >>https://www.ovirt.org/community/about/community-guidelines/ >>List Archives: >>https://lists.ovirt.org/archives/list/[email protected]/message/IIMW6VBS4JBL5WJFTS7AWDS5ENQDB63Y/ > _______________________________________________ Users mailing list -- [email protected] To unsubscribe send an email to [email protected] Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/[email protected]/message/5WYU5SRXKGYDTTLA5WOMYZQULXP4OGLN/ _______________________________________________ Users mailing list -- [email protected] To unsubscribe send an email to [email protected] Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/[email protected]/message/ZJMQOJLFRMQTN6DCESUYALRXKLZWG74R/
