Re: Going back to Stock Jets.

[wforest]

The only proper way to reverse drilled slides is to purchase new ones, don't fool around with something so critical.   Regards, Charles ( [EMAIL PROTECTED] ) ----- Original Message ----- From: Paul Ries To: V-MAX TECH LIST Sent: Tuesday, March 07, 2000 7:09 PM Subject: Re: Going back to Stock Jets. Pat,      I thought of that, I wonder what's the best glue for the job? some sort of 2 part epoxy that is resistant to gasoline I should think. Don't know of any, however. I believe #29 index drill is the stock size. Thanks for the suggestion Pat. It might come to that if I can't get DJ kit to work right. Paul ----- Original Message ----- From: P. Kuyper To: V-MAX TECH LIST Sent: Tuesday, March 07, 2000 8:08 AM Subject: RE: Going back to Stock Jets. If the slides are drilled out, it CAN be reversed.   Take some good 2-component glue. Close the hole with the glue and let it dry thoroughly. Drill in the original size holes again. However, at the moment I do not know the size. Anyone??   Patrick Kuyper Vmax Club Holland The Netherlands -----Original Message----- From: Paul Ries [mailto:[EMAIL PROTECTED]] Sent: zondag 5 maart 2000 6:32 To: V-MAX TECH LIST Subject: Going back to Stock Jets.     I've been fighting a carb problem on my '85.