> The bearings are not sealed for a reason. The speedo drive
> coupling needs to run in grease. Thats why on at least the
> left side you need to use an open bearing and external seal.
Are we sure about this? I just put sealed bearings in my Venture
wheels, and have sealed bearings in the Venture wheels that are
being modified for my Vmax.
Wouldn't it be okay to simply load up the speedo drive with
grease? That way the sealed bearings never lose their grease,
and the speedo drive won't lose its grease either- The bearing
will seal the inside, and the rubber seal will handle the outside.
It seems to me that if the speedo gets its grease from the bearing,
the bearing itself will suffer when the grease is transferred to
the speedo drive. No?
Please, anyone with knowledge of this chime in. Thanks!
-K
======================================================================
Kelly Cash Main: 408-727-5497
Solid Data Systems FAX: 408-727-5496
2945 Oakmead Village Court [EMAIL PROTECTED]
Santa Clara, CA 95051 www.soliddata.com
======================================================================
.............................................
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.............................................
