To add to this. I recently installed a set of Tokico (sp?) on the front of
my '88. The master covers said DOT 3 or DOT 4. I used DOT 4 but later
noticed that the service manual calls for DOT 3 with no refence to DOT 4.
What's the scoop?
Bryan
----- Original Message -----
From: Jim McCormick <[EMAIL PROTECTED]>
To: V-MAX TECH LIST <[EMAIL PROTECTED]>
Sent: Tuesday, March 21, 2000 2:43 PM
Subject: Brake fluid
> I just replaced the damaged front brake master cylinder on my '85 Max with
> one from a '98. My '85 is marked for Dot 3 brake fluid, and the '98 unit
is
> marked for Dot 4. The old Dot 3 fluid is still present in the front brake
> system in the lines and calipers. Are there any compatibility problems?
I'd
> like to use Dot 4, but I'm not sure if I'm going to have a problem. Any
help
> would be greatly appreciated.
>
> Thanks,
> Jim McCormick
> VMOA #889
> '85 Max
> '74 Z1
>
> .............................................
> To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
> .............................................
>
.............................................
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.............................................
