Jim McCormick wrote:
> I just replaced the damaged front brake master cylinder on my '85 Max with
> one from a '98. My '85 is marked for Dot 3 brake fluid, and the '98 unit is
> marked for Dot 4. The old Dot 3 fluid is still present in the front brake
> system in the lines and calipers. Are there any compatibility problems? I'd
> like to use Dot 4, but I'm not sure if I'm going to have a problem. Any help
> would be greatly appreciated.
>
Jim,
Dot 3 and Dot 4 are compatible, if not the same. When you buy the brake
fluid, check the specs and most likely is Dot 3 and Dot 4 approved. SS DF
The only different one is Dot 5 because is silicon based.
begin:vcard
n:Aguiar;Mario
x-mozilla-html:FALSE
adr:;;;;;;
version:2.1
email;internet:[EMAIL PROTECTED]
x-mozilla-cpt:;0
fn:Mario Aguiar
end:vcard
