[EMAIL PROTECTED] wrote:
>
> cant get my fork cap bolts (1994)off to change my springs, they wont budge,
> just sprayed some wd40 and will try again tomorrow , was hoping some one had
> a tip before i totally round the head off the nut, thanks
Vinny, first I would use Liquid Wrench ILO WD-40 it's a much better
penetrant. If you have already started rounding off the edges, I'd try
to find a Metwrench socket to get a better grip on the sides instead of
the tips of bolts as all other sockets do. I know, I sound like a
commercial but it is a good product that does what it claims. If you
don't already have one, get a manual impact wrench. With the
appropriate adapter, you should be able to break the bolts free. While
holding and turning the wrench in the direction you want to go, a few
quick slaps with a hammer should break the bolts free.
Well, that's what I would do....
Good luck,
PDA
--
=============================================================
Vmaxman (Pasquale Dell'Aquila) mailto:[EMAIL PROTECTED]
VMOA #1282
Homepage - http://www.Vmaxman.com Last Updated 5/25/2000
1993 Yamaha Vmax 1971 Yamaha DT1-E
1984 Honda Nighthawk S 1971 Yamaha DT1-MX
=============================================================
.............................................
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.............................................
