----- Original Message -----
From: [EMAIL PROTECTED]
>>>hi guys. can anyone tell me if 'works shocks' are available in the uk (if
so
where from?).
'H' (Exactrep) may have a set in stock, but last time I spoke to him
he was having big problems with supply. I can arrange a set from the US if
you get stuck.
>>> also if i raise the rear end (aprox 1in) and lower the front end (aprox
1in,
by sliding the yokes down fork legs) will this benefit the
cornering/handaling? or just make the max weave more?
Change the fork springs (Progressive/Race Tech), add R.Tech valve
emulators & dump the air in the forks for a world of difference...
>>>> what about rear wheel conversion, and radial tyres, dose this make
enough difference to be worth the cost??
Modern (radial) tyres are highly recommended by everyone who's done
it, "worth the cost" depends on how much/which wheels etc..
>>>> dose custom fitting a fram mount fairing help the handling?
Wind buffeting; yes (depending how big your are), handling; wouldn't
like to say...
>>>> ..... but i haven't noticed any high speed weave yet (but i haven't
been over 145mph yet).
You won't get there on a standard Max, either ;-) ..usually appears
at 110ish..
>>>> i have noticed that if you treat it like a motocrosser, e.g. keep the
power on right through the bends, its quite good fun (hard work though!).
you're not wrong..
keep your mirrors cleen people...val.
Where in the UK are you? Checked out the UK VMax Club
yet(www.vmax.co.uk) ? Email me offline & I'll give you some prices ;-)
Steve (Swansea)
http://unclefesters.com
[EMAIL PROTECTED]
.............................................
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.............................................
