I also have problems with 4 quad LNBs on a diseqc switch (1.0 and another 2.0) If I plug out the cable from the card and plug it back again (reset switch and LNBs) I can use szap to change the channels. I believe the quad LNBs have diseqc switch inside and at reset they are in backward compatible mode (Tone/Voltage). In Diseqc specifications/recommendations they recommend the diseqc LNB should ignore responding to Tone/Voltage commands when they receive one diseqc command. Unfortunately, I did not find the proper diseqc commands for the LNBs.
I will try today a workaround to reset the LNB before sending the diseqc.conf sequence in backward compatible mode: - switch to another LNB (hope the power will be cut for the one I need for the channel) - do the sequence for current channel t v [E0 10 38 FF] W500 (switch to LNB4 and wait 500) [E0 10 38 F0] W100 A W15 t (switch to LNB1, wait for power to stabilize, use back compatible) If I am lucky enough the switch will cut the power for the LNB1 when I switch to LNB4. Does anybody knows the Diseqc commands for Quad LNBs?? Thanks, Ilariu On 1/29/07, Markus Hahn <[EMAIL PROTECTED]> wrote:
Hi Grégoire There is a Diseqc command to reset (all) LNBs : [E0 00 00] maybe it could send in some cases. regards markus Am Freitag, 26. Januar 2007 19:16 schrieb Gregoire Favre: > On Fri, Jan 26, 2007 at 01:58:31PM +0100, Klaus Schmidinger wrote: > > > > In case VDR can't tune to a channel, does it resend the diseqc commands ? > > > > Yes, it does, > > Thank. > > Tonight, I try to tune to one of my favorite radio station : > > SSR-Espace 2;Radio Suisse Romande:12399:hC34:S13.0E :27500:0:218:0:0:928:318:8500:0 > > And I got : > > Jan 26 18:24:21 ar vdr: [9259] frontend 0 timed out while tuning to channel 254, tp 112399 > Jan 26 18:25:26 ar vdr: [9259] frontend 0 timed out while tuning to channel 254, tp 112399 > Jan 26 18:26:31 ar vdr: [9259] frontend 0 timed out while tuning to channel 254, tp 112399 > Jan 26 18:27:36 ar vdr: [9259] frontend 0 timed out while tuning to channel 254, tp 112399 > Jan 26 18:28:41 ar vdr: [9259] frontend 0 timed out while tuning to channel 254, tp 112399 > Jan 26 18:29:46 ar vdr: [9259] frontend 0 timed out while tuning to channel 254, tp 112399 > Jan 26 18:30:04 ar vdr: [9259] frontend 0 timed out while tuning to channel 254, tp 112399 > Jan 26 18:31:09 ar vdr: [9259] frontend 0 timed out while tuning to channel 254, tp 112399 > Jan 26 18:32:14 ar vdr: [9259] frontend 0 timed out while tuning to channel 254, tp 112399 > Jan 26 18:33:19 ar vdr: [9259] frontend 0 timed out while tuning to channel 254, tp 112399 > Jan 26 18:34:24 ar vdr: [9259] frontend 0 timed out while tuning to channel 254, tp 112399 > Jan 26 18:35:30 ar vdr: [9259] frontend 0 timed out while tuning to channel 254, tp 112399 > Jan 26 18:36:35 ar vdr: [9259] frontend 0 timed out while tuning to channel 254, tp 112399 > Jan 26 18:37:40 ar vdr: [9259] frontend 0 timed out while tuning to channel 254, tp 112399 > Jan 26 18:38:45 ar vdr: [9259] frontend 0 timed out while tuning to channel 254, tp 112399 > Jan 26 18:39:50 ar vdr: [9259] frontend 0 timed out while tuning to channel 254, tp 112399 > Jan 26 18:40:55 ar vdr: [9259] frontend 0 timed out while tuning to channel 254, tp 112399 > Jan 26 18:42:00 ar vdr: [9259] frontend 0 timed out while tuning to channel 254, tp 112399 > Jan 26 18:43:05 ar vdr: [9259] frontend 0 timed out while tuning to channel 254, tp 112399 > Jan 26 18:44:10 ar vdr: [9259] frontend 0 timed out while tuning to channel 254, tp 112399 > Jan 26 18:45:15 ar vdr: [9259] frontend 0 timed out while tuning to channel 254, tp 112399 > Jan 26 18:46:20 ar vdr: [9259] frontend 0 timed out while tuning to channel 254, tp 112399 > Jan 26 18:47:25 ar vdr: [9259] frontend 0 timed out while tuning to channel 254, tp 112399 > Jan 26 18:48:30 ar vdr: [9259] frontend 0 timed out while tuning to channel 254, tp 112399 > Jan 26 18:49:35 ar vdr: [9259] frontend 0 timed out while tuning to channel 254, tp 112399 > Jan 26 18:50:40 ar vdr: [9259] frontend 0 timed out while tuning to channel 254, tp 112399 > Jan 26 18:51:45 ar vdr: [9259] frontend 0 timed out while tuning to channel 254, tp 112399 > Jan 26 18:52:50 ar vdr: [9259] frontend 0 timed out while tuning to channel 254, tp 112399 > Jan 26 18:53:55 ar vdr: [9259] frontend 0 timed out while tuning to channel 254, tp 112399 > Jan 26 18:55:00 ar vdr: [9259] frontend 0 timed out while tuning to channel 254, tp 112399 > Jan 26 18:56:05 ar vdr: [9259] frontend 0 timed out while tuning to channel 254, tp 112399 > > Tuning back to Astra (for example DMAX : > DMAX;T-Systems:12633:hC56:S19.2E:22000:203:303=deu:503:0:12602:1:1113:0 ) tune directly. > > And then back to Espace 2 again : > > Jan 26 19:07:42 ar vdr: [9259] frontend 0 timed out while tuning to channel 254, tp 112399 > Jan 26 19:08:47 ar vdr: [9259] frontend 0 timed out while tuning to channel 254, tp 112399 > > In fact it only tune to channels on Astra 19.2E but no Hotbird 13.0E > neither Astra 28.2E. > > I stop vdr and restart : > > Jan 26 19:09:49 ar vdr: [15712] frontend 0 timed out while tuning to channel 254, tp 112399 > > Then I quit VDR and reload the driver : it then tune without any > problem, directly. > > Is there a way to achieve this without reloading the driver ? > > In case more info are needed on my setup : > http://www.linuxtv.org/pipermail/linux-dvb/2007-January/015463.html > > Thank you very much, -- ----------------------------------------------------- Markus Hahn, Developer. Reel Multimedia AG Felsenrainstrasse 33 CH-8832 Wollerau / Switzerland Tel.: +49 (0) 180 / 508 81 11 (operator) Fax.: +49 (0) 180 / 508 81 14 [EMAIL PROTECTED] www.Reel-Multimedia.com _______________________________________________ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
_______________________________________________ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
