Hi, On Sun, Feb 11, Dieter Bloms wrote:
> > I'd like you to do some further tests by modifying diseqc.conf: > > I will do each setup for about 1 week and will see, if I miss some > recordings and let you about the results. no diseqc setup works stabel for me :( Also the Full DiSEqC sequence from default diseqc.conf doesn't work a few hours after reboot and sometime it doesn't work directly after reboot. But I can switch the channel with szap and get the TS stream from /dev/dvb/adapter1/dvr0 every time, even vdr can't record I only stop vdr and do not a reload of the driver. I did some tests with szap: o I can only get the TS stream with the default lnb type or -l UNIVERSAL o if I use another lnb type like ENHANCED, I can switch, but don't get any data. o The ioctls are the same if I use diseqc with vdr, but as I said before, I didn't get any data a few hours after reboot of the system, and sometime I didn't get any data directly after reboot. o If I use szap, I can switch the channels and get the ts stream every time (via cat /dev/dvb/adapter1/dvr0 > /tmp/bla). o the first status is 01 and it has no lock all others are 1f and it has a lock (as seen below). o when I call szap the second time (with the same channel) the first status is 01 and then 1f, too. o maybe vdr does have to wait a longer time ? What lnb type vdr is using, when I enable diseqc in vdr menu ? I can't configure any frequenz after activate diseqc. Here the output from your patched szap: video:/tmp/szap # ./szap -l UNIVERSAL -a 1 -r -c /etc/vdr/channels.conf -n 2 reading channels from file '/etc/vdr/channels.conf' zapping to 2 'Das Erste;ARD': sat 0, frequency = 11836 MHz H, symbolrate 27500000, vpid = 0x0065, apid = 0x0066 sid = 0x0068 using '/dev/dvb/adapter1/frontend0' and '/dev/dvb/adapter1/demux0' t: 1171518269.386, c: 1, r: 0, a: ---------------------------------------------- t: 1171518269.386, c: 1, r: 0, a: ioctl(fd, FE_SET_TONE, SEC_TONE_OFF) t: 1171518269.389, c: 1, r: 0, a: ioctl(fd, FE_SET_VOLTAGE, v) (v = SEC_VOLTAGE_18) t: 1171518269.408, c: 1, r: 0, a: ioctl(fd, FE_DISEQC_SEND_MASTER_CMD, &cmd->cmd) t: 1171518269.576, c: 1, r: 0, a: ioctl(fd, FE_DISEQC_SEND_BURST, b) (b = SEC_MINI_A) t: 1171518269.700, c: 1, r: 0, a: ioctl(fd, FE_SET_TONE, t) (t = SEC_TONE_ON) t: 1171518269.702, c: 1, r: 0, a: ioctl(fefd, FE_SET_FRONTEND, &tuneto) status 01 | signal f700 | snr e330 | ber 00000000 | unc fffffffe | status 1f | signal f700 | snr f866 | ber 00000000 | unc fffffffe | FE_HAS_LOCK status 1f | signal f700 | snr f8ea | ber 00000000 | unc fffffffe | FE_HAS_LOCK status 1f | signal f700 | snr f8cd | ber 00000000 | unc fffffffe | FE_HAS_LOCK status 1f | signal f700 | snr f8aa | ber 00000000 | unc fffffffe | FE_HAS_LOCK status 1f | signal f700 | snr f887 | ber 00000000 | unc fffffffe | FE_HAS_LOCK status 1f | signal f700 | snr f8a4 | ber 00000000 | unc fffffffe | FE_HAS_LOCK status 1f | signal f700 | snr f93c | ber 00000000 | unc fffffffe | FE_HAS_LOCK status 1f | signal f700 | snr f8ad | ber 00000000 | unc fffffffe | FE_HAS_LOCK status 1f | signal f700 | snr f8a9 | ber 00000000 | unc fffffffe | FE_HAS_LOCK status 1f | signal f700 | snr f93f | ber 00000000 | unc fffffffe | FE_HAS_LOCK status 1f | signal f700 | snr f88a | ber 00000000 | unc fffffffe | FE_HAS_LOCK status 1f | signal f700 | snr f8e8 | ber 00000000 | unc fffffffe | FE_HAS_LOCK status 1f | signal f700 | snr f81b | ber 00000000 | unc fffffffe | FE_HAS_LOCK status 1f | signal f700 | snr f911 | ber 00000000 | unc fffffffe | FE_HAS_LOCK -- Gruß Dieter -- I do not get viruses because I do not use MS software. If you use Outlook then please do not put my email address in your address-book so that WHEN you get a virus it won't use my address in the From field.
pgp58ZhIdLiqt.pgp
Description: PGP signature
_______________________________________________ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
