On 02/10/08 17:12, Theunis Potgieter wrote:
> It appears to switch over to encrypted channel after a minute or
> so.Only if I tried it a couple of times, and only then, once it
> switched over it starts to record even if the timer was set a few
> minutes earlier.

Could it be that your CAM has problems handling FTA and CA channels
at the same time?

The CAM I use here has no problem with this.


> On 2/10/08, Antti Hartikainen <[EMAIL PROTECTED]> wrote:
>> On Sun, Feb 10, 2008 at 10:46:25AM +0100, Klaus Schmidinger wrote:
>>> On 02/10/08 09:16, Antti Hartikainen wrote:
>>>> NumUsableSlots = 4
>>> You wrote that you are using only a single budget card.
>>> How can a single budget card have 4 CI slots?
>>> And all four of these apparently contain a CAM that is ready?!
>> Well one slot for each card ;) System has totally 6 DVB-devices, but at the
>> moment of testing only one (1) DVB-T tuner was available for VDR (3 other
>> devices
>> were DVB-S tuners, including FF-card too).
>> NumUsableSlots is one less when error about channel not being available
>> appears, so slot of this card disappears somewhere?

vdr mailing list

Reply via email to