I believe it is the CAM too, and me being a user :) I'll wait for someone with more experience than myself to better explain and/or know what to look for. Thanks Klaus, great product!
On 2/10/08, Klaus Schmidinger <[EMAIL PROTECTED]> wrote: > On 02/10/08 17:12, Theunis Potgieter wrote: > > It appears to switch over to encrypted channel after a minute or > > so.Only if I tried it a couple of times, and only then, once it > > switched over it starts to record even if the timer was set a few > > minutes earlier. > > Could it be that your CAM has problems handling FTA and CA channels > at the same time? > > The CAM I use here has no problem with this. > > Klaus > > > On 2/10/08, Antti Hartikainen <[EMAIL PROTECTED]> wrote: > >> On Sun, Feb 10, 2008 at 10:46:25AM +0100, Klaus Schmidinger wrote: > >>> On 02/10/08 09:16, Antti Hartikainen wrote: > >>>> NumUsableSlots = 4 > >>> You wrote that you are using only a single budget card. > >>> How can a single budget card have 4 CI slots? > >>> And all four of these apparently contain a CAM that is ready?! > >> Well one slot for each card ;) System has totally 6 DVB-devices, but at > the > >> moment of testing only one (1) DVB-T tuner was available for VDR (3 other > >> devices > >> were DVB-S tuners, including FF-card too). > >> > >> NumUsableSlots is one less when error about channel not being available > >> appears, so slot of this card disappears somewhere? > > _______________________________________________ > vdr mailing list > firstname.lastname@example.org > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr > _______________________________________________ vdr mailing list email@example.com http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr