Alex Lasnier wrote: > Rob Davis wrote: > >> I have it normally connected to Comcast cable which should pipe through >> a bunch of FTV channels using QAM256. These I can see and hear in >> kaffeine with AC97 audio. However, in VDR it appears to change the pids >> automatically so that the audio stops working. If I manually change VDR >> to not auto update and put the APID in then it squeeks rather than >> works. However, streaming to mplayer using streamdev seems to work. (It >> does the same this with OTA channels too - although I can only get 4 >> with a portable antenna.) >> > > ATSC uses only AC-3 audio, so the Apid should be 0 and the Dpid needs to > be set appropriately. Since the sound squeaks, whatever value you have > set for the Apid should be the Dpid. > > For example, > > WIFR-Wx:495000:M256:C:0:1984:0;Dpid:0:0:2:0:0:0 > > Perfect... Thanks
Is there a way to keep auto update on, but stop Comcast from sending wrong pids? It keeps settings all audio options to 0 and some vpids too? _______________________________________________ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
