On Thu, Aug 27, 2009 at 10:44:59AM +0100, dave cunningham wrote:
> Do standard CRTs handle this increased resolution/clock? I've never tried
> driving this signal into my TV.
I haven't experienced any problems even with very old TVs caused by the
higher video signal bandwidth.
> In fact I use the cable from here
> <http://members.optusnet.com.au/eviltim/scart.htm> with the cut off
> circuit so I'd actually have to build a new cable to use this resolution.
you can use any VGA2SCART cable realizing some composite sync circuitry.
My favorite cable (the simplest circuit I know from) is described in my README.
I don't know why most VGA2SCART cables are composed of so many parts.
> Not that that's particularly difficult but do you gain any advantage using
> the higher resolution on the Intel cards vs standard 576i with ATI. If not
> then I'll probably just save the hassle and buy an ATI card of eBay
ATI cards do have a major drawback compared to Intel cards:
They can't scale vertically in interlaced mode because they can't scale
both fields independently. So your TV must handle format adaptions.
vdr mailing list