On ti, 2015-05-12 at 16:40 +1000, Torgeir Veimo wrote:
> I just tried vdr-fbfe compiled from CVS on the RPI, and there's still
> that judder when pressing keys when the OSD menu is showing. Is this
> possible to remedy somehow? This was one of the issues that made me
> switch to softhddevice a few years ago.
I haven't noticed this.
Did you compile xine-lib from hg or are you using some older version ?
RPi HW OSD support is not in xine-lib 1.2.6.
Do you run also VDR in RPi ? Maybe it uses too much resources when
rendering OSD ?
Also, I have mpeg2 decoding key. It makes SD smoother ...
> On 21 April 2015 at 23:36, Harald Milz <h...@seneca.muc.de> wrote:
> > On Tue, Apr 21, 2015 at 12:41:57PM +0300, Petri Hintukainen wrote:
> >> Do you mean setting the marks (and letting remote VDR to do the actual
> >> editing) ? Or using VDR in RPi to cut recordings ? Cutting with RPi is
> >> probably very slow and consumes lot of limited I/O resources.
> >>
> >> For setting editing marks - probably, I'm not sure. I rarely edit
> >
> > Yes sure. With vdr-{sxfe,fbfe} you get a remote OSD from the server VDR,
> > i.e.
> > you work on the server, not the RPi. No data is transferred over the net
> > except the OSD when cutting.
> >
> >> Latency with 100Mbit/s ethernet is not noticeable. It can be even faster
> >
> > For SD 100 MBit is fine. For HD it should be okay also. As far as Wifi, 54
> > MBit is okay-ish for SD but better go for 300 on 5 GHz (to make sure the
> > wifi is near-exclusively used for the VDR link).
> >
> >> One possible source of problems is audio decoding performance. I'm not
> >> EAC3 ?). AC3 decoding uses ~ half of RPi CPU time. Here the additional
> >> CPU power of RPi 2 would be useful.
> >
> > Better use HDMI pass-through and have the AC3 receiver decode the stream.
> > The Pi
> > has only a 2.0 analog output anyway, so there's little point in decoding on
> > the Pi.
> >
> >
> > --
> > You will be traveling and coming into a fortune.
> >
> > _______________________________________________
> > vdr mailing list
> > vdr@linuxtv.org
> > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
>
>
>
_______________________________________________
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
