The nylon forms bonds while the head dries making the whole thing stronger.
----- Original Message -----
From: "Dr. Doug Miller" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, December 17, 2002 8:43 PM
Subject: Re: [VFB] Finished fly head


> Okay, Jerry. . .
> You've got my curiosity up!  Why ". . .with Nylon?"
> Does it make any difference?  Or is that the ONLY way you can buy the
clear
> stuff?
> Thanks,
> Doug
>
> ----- Original Message -----
> From: "Jerry Goldsmith" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Tuesday, December 17, 2002 9:13 AM
> Subject: RE: [VFB] Finished fly head
>
>
> > Listers,
> >
> > >
> > > Deb,
> > >
> > >          That's correct.  What I used to do when painting heads
> > > was to use
> > > head cement first, to soak into the thread, then use the paint on top
of
> > > the cement.  Since the cement had already dried, it tended to keep the
> > > paint from soaking back into the feathers.
> > >
> > > Mark
> >
> > >
> > > Deb hit the nail on the head - finger nail that is.
> > >
> > > Sally Hansen's "Hard As Nails" finger nail polish.
> > >
> > > Allan
> > >
> > Let me add my two cents and this thread will be worth about nickel :-)
> > I am generally tying Saltwater Flies so your mileage might vary, but I
> have
> > not found
> > a head cement that penetrates as well as Dave's Flexament. What is
really
> > amazing
> > about this stuff is if you tie a fly with it and then want to reclaim
the
> > hook for
> > some reason, you cannot just untie and pull the material off.  You have
> CUT
> > the
> > material off with A RAZOR.  It penetrates that deep and that well.
> >
> > Secondly, SALLY HANSEN'S "Hard as Nails" is definitely the best shiny
> finish
> > you can use !!  BUT be sure you get the  Hard as Nails WITH NYLON !!  It
> is
> > on
> > the label just below "hard as Nails"  very prominent.  you cannot miss
it.
> > Unless I need a large build up on the head or body, I seldom use epoxy
on
> my
> > heads any more.  In fact.  in the tropical heat, hard as nails out
> performs
> > epoxy.
> >
> > First coat is a good shot of flexament,  second is coat is Sally
> >
> >
> > JG
> >
> >
> > Jerry Goldsmith
> > Altamonte Springs, Fl
> > [EMAIL PROTECTED]
> >
> >
> >
> >
> >
> >
>


Reply via email to