Howdy folks. I use a topless LC III to test old scsi drives, but this one has me hornswoggled. Hooked up and plugged in, this drive, pulled from a IIfx, just clicks and its red power LED just blinks. I'm starting up from an external scsi ZIP volume, but the startup hangs whenever the Imprimis is plugged into the LC III's internal HDD scsi cable.
Looking at the Imprimis drive from the rear, there are seven jumper pairs just to the left of the AC power receptacle. Counting from the right, the first two positions are jumpered, while the other five are not. Then, just to the right of the scsi connector, there are two more sets. Counting from the left, the first pair is jumpered. Please help me make sense of this. Bob F -- Vintage Macs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Enter To Win A | -- Canon PowerShot Digital Cameras start at $299 | Free iBook! | Support Low End Mac <http://lowendmac.com/lists/support.html> Vintage Macs list info: <http://lowendmac.com/lists/vintagemacs.shtml> The FAQ: <http://macfaq.org/> Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/vintage.macs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
