ok, 2" narrowed bj beam installed. also installed shims under beam. started to install steering coupler and noticed angle of steering shaft to steering box isn't straight on. bolted everything up thinking it might all come together and the round coupler got "curvy" looking from the bad angles. looked at the steering wheel and there was like 5/8" gap between the steering wheel and the turn signal collar. So i loosen the beam bolts and slide out the caster shims and tighten everything back up. remove the steering coupler and see that the steering shaft and steering box are almost lined up straight, and the steering wheel is perfectly spaced with the turn signal. put the steering coupler back in and the steering wheel only sticks out about 7/16". Is there something adjustable I'm missing? can the steering column be slid up to make up for that 7/16"s? Thanks folks. ;=- pete 707CA
_______________________________________________ vintagvw site list [email protected] http://lists.sjsu.edu/mailman/listinfo/vintagvw
