Sammy, I put a new 1600 DP into my 62 Karmann Ghia a couple of years ago.200mm flywheel, you need to grind 4 areas that interfere. I used a Black and Decker rasp that fitinto my variable speed drill. The rasp was like a small cylinder with a shaft coming out of it that you place in the drill motor. So nice and slow you use the teeth on the rasp to gently grind away the metal inside those points on the bell housing. The teeth on the rasp are similar to a cheese grater. It cuts hunks out slowly and without HEAT. You could make a cardboard template to check clearances. After you fit the motor turn it to ensure the flywheel is not binding. It worked like a charm. Only take what you need off...don't overdo it. Check RAMVA newsgroup archives too. Eric 62 Ghia 68 Bug both topless
this area include the tranny mount > bolts?) > > What other options are there? > > Thanks in advance. > > Regards, > Sammy > > _______________________________________________ > vintagvw site list > [email protected] > http://lists.sjsu.edu/mailman/listinfo/vintagvw > _______________________________________________ vintagvw site list [email protected] http://lists.sjsu.edu/mailman/listinfo/vintagvw
