Thanks Scott.  I'll continue to work with this individual on a decent solution 
and will try your suggestion about removing the cable.

Les
On Jul 19, 2012, at 5:49 AM, Scott Howell wrote:

> Les,
> 
> I know this is not much as an answer, but with Time I have just managed to 
> hit the hole pretty accurately. THe connection is not super tight so what I 
> have done to remove it is grab the connector as close to the connecting point 
> as I can and work it out. One suggestion I read about and had not gotten 
> around to trying is adapting a really stiff wire or some piece of material 
> that you can rap tape to the usb cable. THis would provide a firmer section 
> to the cable which makes it easier to maneuver. Although if you have the case 
> I know a lot of folks just leave the cable attached and store it behind the 
> flap of the case when closed.
> I believe there is a solution, but it would take resources to implement.
> 
> On Jul 18, 2012, at 7:56 PM, Les Kriegler <[email protected]> wrote:
> 
>> Hi Scott,
>> 
>> How do you locate the proper portion of the cable to unplug?  Any 
>> recommendations for plugging in the cable?
>> 
>> Les
>> On Jul 18, 2012, at 7:37 PM, Scott Howell wrote:
>> 
>>> I use the display and the cable. With practice I have been able to connect 
>>> and disconnect the cable without pulling the cable itself. I agree it is 
>>> not an ideal design.
>>> 
>>> On Jul 18, 2012, at 5:09 PM, Les Kriegler <[email protected]> wrote:
>>> 
>>>> I am working with an individual who just received the Refresh-a-Braille 
>>>> unit.  We had no problems in pairing the device, but we did encounter 
>>>> difficulty in plugging in the charger into the display's connector.  Even 
>>>> with sighted assistance, we could not get the charger in far enough in 
>>>> order to get the unit charging.  We resorted to using a fork to push thew 
>>>> connector in the final distance, but this is no solution. Also, because 
>>>> the USB port and accompanying plug are not exposed, it appears once must 
>>>> remove the plug by pulling on the wire, again not a good idea.  I know a 
>>>> number of you use this display.  Do you use the USB cable that came with 
>>>> the unit, or did you get a thinner USB cable?  Quite honestly, I am 
>>>> surprised at what I consider to be a really poorly designed connector for 
>>>> this display.  Any help is appreciated.
>>>> 
>>>> Les
>>>> 
>>>> -- 
>>>> You received this message because you are subscribed to the "VIPhone" 
>>>> Google Group.
>>>> To search the VIPhone public archive, visit 
>>>> http://www.mail-archive.com/[email protected]/.
>>>> To post to this group, send email to [email protected].
>>>> To unsubscribe from this group, send email to 
>>>> [email protected].
>>>> For more options, visit this group at 
>>>> http://groups.google.com/group/viphone?hl=en.
>>> 
>>> -- 
>>> You received this message because you are subscribed to the "VIPhone" 
>>> Google Group.
>>> To search the VIPhone public archive, visit 
>>> http://www.mail-archive.com/[email protected]/.
>>> To post to this group, send email to [email protected].
>>> To unsubscribe from this group, send email to 
>>> [email protected].
>>> For more options, visit this group at 
>>> http://groups.google.com/group/viphone?hl=en.
>> 
>> -- 
>> You received this message because you are subscribed to the "VIPhone" Google 
>> Group.
>> To search the VIPhone public archive, visit 
>> http://www.mail-archive.com/[email protected]/.
>> To post to this group, send email to [email protected].
>> To unsubscribe from this group, send email to 
>> [email protected].
>> For more options, visit this group at 
>> http://groups.google.com/group/viphone?hl=en.
> 
> -- 
> You received this message because you are subscribed to the "VIPhone" Google 
> Group.
> To search the VIPhone public archive, visit 
> http://www.mail-archive.com/[email protected]/.
> To post to this group, send email to [email protected].
> To unsubscribe from this group, send email to 
> [email protected].
> For more options, visit this group at 
> http://groups.google.com/group/viphone?hl=en.

-- 
You received this message because you are subscribed to the "VIPhone" Google 
Group.
To search the VIPhone public archive, visit 
http://www.mail-archive.com/[email protected]/.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to 
[email protected].
For more options, visit this group at 
http://groups.google.com/group/viphone?hl=en.

Reply via email to