Hello everyone. I got my Standscan pro today and have some questions. First, I've looked ad gthe description and don't understand the assembly instructions that Anne posted. I may need some sighted assistance. There are three accessories that came with my Standscan. One is an AC adapter. There is a box with a switch on it that has a short cable that connects to the cable from the Standscan pro. There's a third long narrow box with a cable on one end. I assume that this is a battery pack. First, how do I charge the battery pack? What is the function of the box with the switch? It appears that all three boxes connect to the Standscan pro.
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Anne Robertson Sent: Sunday, March 16, 2014 5:58 PM To: [email protected] [email protected] Subject: Setting up the StandScan Pro Hello everyone, Here is a description of how to set up the StandScan Pro that I posted almost a year ago. Lay the folded StandScan on a table with the small flap away from you. Open the small flap and fold back the body of the StandScan towards you. Now the topmost piece should open to the left, and the remaining part will open to the right but will still be a double thickness. Open the final piece to the right. Go to the lefthand piece and you'll find that there is a crease running from where it joins the second piece to the lefthand edge, a few centimetres in. Fold along this crease making an elongated triangle. The same thing can be found on the back edge of the same piece, and on the front and back edges of the third section. The piece at the extreme right is the top and you can find the LEDs along its back edge, and the cable at its back left corner. Lift the righthand section and lift the lefthand section, then fold over the flap at the end of the section with the LEDs so that the magnets meet the magnets on the lefthand section. A flap of the top section folds down to engage with the magnets on the triangular pieces, and the piece still lying flat at the back lifts up to meet the top and the triangular side pieces at the back. Your StandScan should now look like a large box with an open front and a short cable coming out of the upper back lefthand corner. Cheers, Anne -- You received this message because you are subscribed to the "VIPhone" Google Group. Post a new message to VIPhone by emailing [email protected]. Search and view the VIPhone archives by visiting http://www.mail-archive.com/[email protected]/. Reach the VIPhone owner and moderators by emailing [email protected]. Unsubscribe and leave VIPhone by emailing [email protected]. More VIPhone group options can be found by visiting http://groups.google.com/group/viphone?hl=en. --- You received this message because you are subscribed to the Google Groups "VIPhone" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout. -- The following information is important for all members of the viphone list. All new members to the this list are moderated by default. If you have any questions or concerns about the running of this list, or if you feel that a member's post is inappropriate, please contact the owners or moderators directly rather than posting on the list itself. The archives for this list can be searched at http://www.mail-archive.com/[email protected]/. --- You received this message because you are subscribed to the Google Groups "VIPhone" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/viphone. For more options, visit https://groups.google.com/d/optout.
