Nothing new. That is actually a direct copy of a HP 16074A 4-terminal quasi inductance standard. Even the pictures of the article were copied directly from the HP manual.
> 2015-08-20 11.50 UTC+03.00, Dr. David Kirkby (Kirkby Microwave Ltd) > <[email protected]>: > >> If this was April the first, I would be convinced that paper was an April >> Fools Joke! >> >> I can't imagine how you can make high Q (low loss) inductors, by using a >> capacitor and two resistors. It just makes no sense to me, but I will >> read >> the maths later. The mere fact there is resistance makes me think it must >> be lossy, so low Q. Also the equations seems to come out with convenient >> numbers - R in Ohms, C in pF and H in Henries. >> >> But if the paper is real, it is very close to what I want, although it >> still leaves the position of finding stable capacitors. I thought >> inductors >> would be easier than capacitors, but maybe not. >> >> Dave >> _______________________________________________ >> volt-nuts mailing list -- [email protected] >> To unsubscribe, go to >> https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts >> and follow the instructions there. >> > _______________________________________________ volt-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts and follow the instructions there.
