I would suggest running two identical reactors in the same room (one without fuel) with heating resistances (identical) in series. If the fueled reactor becomes hotter, we have excess heat. One can film (MFMP style) the measurement of the resistance of the heaters before, and the voltage on them during the operation, to prove to skeptics that one have excess heat.
Alberto. On Thu, Mar 19, 2015 at 1:41 PM, Peter Gluck <[email protected]> wrote: > The main player is hydrogen. LIALH$ contains ` 10% in weight > H2, i.e. 6mgr. > 2 gr H2 is 22410 mL in standard conditions; ergo 6mgr hydrogen > makes 67 mL gas. This is disappearing during the process > adsorbed in the melt and...? > Peter > > > On Thu, Mar 19, 2015 at 7:22 PM, <[email protected]> wrote: > >> If there are some air in the reactor the oxygen will oxidise Ni an >> possible other compounds then the temperature becomes high enough. >> >> This binds the oxygen and it will lower the pressure. >> >> It will also make some heat, but only until the oxygen are consumed. >> >> Torulf >> >> >> >> On Thu, 19 Mar 2015 11:44:40 -0400, ChemE Stewart <[email protected]> >> wrote: >> >> That's awesome! >> >> On Thursday, March 19, 2015, Jack Cole <[email protected]> wrote: >> >>> It is impressive even without calorimetry. He would have to make a >>> severe mistake on input power measurement to be off that far. To be more >>> specific, he would have to make a mistake on input power measurement on the >>> run with fuel that he did not make on the run without the fuel (very >>> unlikely). >>> >>> On Thu, Mar 19, 2015 at 10:15 AM, Peter Gluck <[email protected]> >>> wrote: >>> >>>> Dear Jack, >>>> This morning - 8 hours ago, the reactor was still working. Nothing was >>>> announced till now. >>>> I am sure Alexander will work out a proper calorimetry system, not easy >>>> - if no sufficient cooling (as in his older system) risk of overheating >>>> and burnout. >>>> I have searched for the new sort of nickel he is using- it is Ni-carbonyl >>>> powder according to GOST 9722-97 (Like ASTM, DIN) type PNK-O2 >>>> See please here- with Google Translate >>>> http://meganorm.ru/Data2/1/4294820/4294820717.pdf >>>> Please tell me if it does not work so. >>>> >>>> On Thu, Mar 19, 2015 at 4:41 PM, Jack Cole <[email protected]> wrote: >>>> >>>>> Great work Peter. The fact that he has repeated the results using a >>>>> method alternative to his calorimetry is very encouraging. In addition, >>>>> the fact that he was able to run for such a long time easily rules out >>>>> chemical effects. Hopefully, it will keep on running for more days to >>>>> weeks. I was concerned about the fact that he ran out of his initial >>>>> supply of nickel, but fortunately, the concern appears unfounded. There >>>>> is >>>>> another important detail disclosed - he only obtained 5 bar of pressure at >>>>> max. This may well indicate that relatively low pressures are fine for >>>>> initiating the reaction. That's good news from a safety perspective. >>>>> >>>>> On Thu, Mar 19, 2015 at 8:00 AM, Peter Gluck <[email protected]> >>>>> wrote: >>>>> >>>> The evolution of pressure is a lesson of realism, we have calculaled >>>> hundreds of bars from inside and have 1/2 bars from outside. >>>> Best wishes, >>>> Peter >>>> >>>>> Dear Friends, >>>>>> I wanted that you should receive these news as fast as possible >>>>>> >>>>>> >>>>>> >>>>>> http://egooutpeters.blogspot.ro/2015/03/fast-issue-lenr-parkhomov-news-from.html >>>>>> We will discuss detais and connections later. >>>>>> Peter >>>>>> -- >>>>>> Dr. Peter Gluck >>>>>> Cluj, Romania >>>>>> http://egooutpeters.blogspot.com >>>>>> >>>>> >>>> >>>> >>>> -- >>>> Dr. Peter Gluck >>>> Cluj, Romania >>>> http://egooutpeters.blogspot.com >>>> >>> > > > -- > Dr. Peter Gluck > Cluj, Romania > http://egooutpeters.blogspot.com >
