Engineer48 gives flow rates from the digital controlled pumps on ECat
World here:
http://www.e-catworld.com/2016/08/19/analyzing-e-cat-plant-pumps-indicate-cop1-engineer48/
He goes on to comment that some data from the ERV's report is given by
IH in Item 5
*
"WE HAVE ERV DATA*
IH exhibit item 5 states:
According to the data you have reported (averaged data for 10 months or
for 3 ERV reports),
1) the conserved mass flow rate of the system from February to November
2015 was on
average *33,558 kg/day (1,398 kg/h)*.
2) the temperature of the water and steam were on average *68.7º C and
102.8º C*, respectively.
3) the steam pressure was reported (for the entire period) to be *0 kPaG*
*Surprise, Surprise Jed's claimed 36,000kg/day is not correct. I mean
does that really surprise anybody?"
*
As for the 0.0 barG steam pressure, the superheater steam can be drawn
through the piping and into the heat exchanger by a slightly lower
pressure, maybe -0.2 barG on the outlet of the primary side of the heat
exchanger.
So what we have here are 10 months of the ERV's averaged input water
temp, flow rate, output superheated steam temperature and pressure that
seems to be more realistic than Jed's flow statement
"It was 36,000kg/day every day and it never varied".
Well Jed that statement is now *"BUSTED"*.
(He shows a picture of the actual report below that can't be reproduced
here.)
As I've commented several times already, it is better to wait for that
actual facts before jumping to conclusions on second hand reports.
