Bob— I would call the electron sloshing phonic kinetic energy of the Ni lattice—coordinated vibration of the Ni atoms with orbital spin angular momentum of the electron population coordinated as well to keep the lattice in tact. The whole grain is a coherent QM system and is not strongly coupled to the adjacent grains.
The resonant sloshing frequency of a grain can change very fast, if a nuclear reaction happens that gives up energy and angular momentum to the phonic (thermal) vibration of the lattice. Variable magnetic fields that could sweep through a metal made up of similar-sized grains. may result in a rapid increase of heat as each grain experiences a resonance condition which allows the nuclear release of energy and angular momentum to the respective grain’s lattice. Engineering the gradation of grain sizes within a macroscopic metal may allow good control via appropriate magnetic field manipulation. Regular thermal conductivity between grains would be a slow reaction compared to the increase of temperature of single grains subject to a LENR reaction. (Hot grains cool down and adjacent colder grains cool down, in step changes of phonic frequency. Potentially only 1 Planck quanta of angular momentum at a time.) Bob Cook from: Bob Higgins<mailto:[email protected]> Sent: Monday, May 21, 2018 6:20 AM To: [email protected]<mailto:[email protected]> Subject: [Vo]:Fast company in Fresno In the case of Ni, there is not a significant population of P+ or D+ ions in the lattice. When the thermal wave sweeps through the Ni rod, the it sweeps the electrons along like an ocean wave. But, there are barriers - the Ni grains. The barriers form a boundary condition for how well, how quickly, and how fast the electron wave is able to propagate. The grain boundaries cause an electron back-sloshing inside the metal grains, stimulating a BEC-like behavior for the atoms of the metal grain - I called this a transient BEC - and it is stimulated by the collective action of the electrons being sloshed like a liquid. To maximize the transient-BEC effects, Piantelli insists that the metal grains must be "right-sized". Piantelli believes the collective action of electron sloshing in the grain was responsible for the ability to draw-in an H- ion from the surface into the surface metal crystal grain. After a sequence of steps that Piantelli hasn't entirely worked out, the H- merges with a nearby Ni atom, ultimately resulting in a muon-like catalyzed nuclear reaction. I extend that by saying that the energy from the reaction can be semi-coherently returned to the thermal wave - enhancing its amplitude and causing it to stimulate more reactions. The rod is a half-wave thermal wave resonator and the addition of the energy to the thermal wave makes it a thermal wave oscillator. I don't believe proton or deuteron flow within the Ni lattice is part of the thermal wave phenomenon. These ions are simply not able to freely flow in the Ni lattice due to their size. This discussion is not part of my ICCF talk - just the thermal modeling. On Sun, May 20, 2018 at 11:29 PM, Russ <[email protected]<mailto:[email protected]>> wrote: Conduction band moving particles that are not electrons were very clearly described in the work of Talbot and Scott Chubb. They focused their considerable genius on proton conduction which includes deuteron conduction. RIP Scott and Talbot, they were good companions in the study of cold fusion for so many years. From: JonesBeene <[email protected]<mailto:[email protected]>> Sent: Monday, May 21, 2018 2:17 AM To: [email protected]<mailto:[email protected]> Subject: RE: [Vo]:Fast company in Fresno According to the ORNL paper, which may not be related to this - the propagation wave does not consist of conduction band electrons but “phasons” which is a much heavier particulate, like a phonon but also much faster. Wouldn’t it be interesting if potassium ferrite was such ceramic? That exotica may not apply to LENR however, but if it does, there is the possibility of finding better results with lattice alloy combinations (or more likely ceramics) which work more like the phasons in fresnoite. From: Bob Higgins<mailto:[email protected]> The interesting part of the phenomenon is not the speed of propagation per se, but what happens at the metal surface during this propagation. I believe there is a conduction band electron sweep as this type of thermal "wave" passes through the metal grains with perhaps unusual behavior when these electrons are swept up to a metal grain boundary. Also, it appears to be more of a wave - and in that sense it can setup up reflections and standing wave behavior. Look at Krivit's photo of Piantelli's runaway reaction on his Ni rod. It appears to have a standing wave effect for the maximum LENR action in the center of the rod. This seems characteristic of a standing wave pattern. It is possible that the LENR activity, being stimulated by the passage of a thermal wave, can turn the rod into an active medium so that a passing thermal waves can have gain and oscillation - almost like a laser cavity. [cid:ii_jhfhaaou0_1637ff96e0443058]
