He uses a metering pump by manufacturer LMI (UK). Its model P18. Lewan told it.
http://www.lmi-pumps.com/datasheets/Pseries-08-01.pdf max 3.20 GPH (12.1 l/h) 22 psi (1.5 Bar) max stroke frequency = 100 / minute max stroke volume = 2 ml manual of the pump http://www.lmi-pumps.com/datasheets/Pseries-08-01.pdf The problem I see is the follwing: Rossi was asked several times to explain how he switchs off his reactor. He said that he would stop electrical heating and would increase the water flow in order to cool down the reactor. But: why did the reactor continue to operate in the february test? During that test, the water flow was increased (using the tap pressure, not the pump). Temperatures were: 15 C input 20 C output (note: there is no report so far). How could the reactor work under these conditions? Angela -- Empfehlen Sie GMX DSL Ihren Freunden und Bekannten und wir belohnen Sie mit bis zu 50,- Euro! https://freundschaftswerbung.gmx.de
