they want, but it is impossible that there is
ambient pressure, since E-Cat is closed system
Exaclty, there will be a little (unknown) over preassure.
it is even more impossible that steam temperature is above boiling
point of local pressure
Hey! If inside there's over preassure, then the boling point will increase.
That's obvisuly!
Since you don't know the over preassure, then if you read "101 degrees" you
cannot say "it's dry!"
-----Messaggio originale-----
From: Jouni Valkonen
Sent: Friday, August 05, 2011 5:00 PM
To: [email protected]
Subject: Re: [Vo]:Re: [e-cat] Engineer from delta ohm confirms that
galantini instrument is useless
2011/8/5 Mattia Rizzi <[email protected]>:
They claims that tehy have measured a temperature > 100 C degrees and a
pression equal to ambient preassure, so they claims that the steam is dry.
They may claim whatever they want, but it is impossible that there is
ambient pressure, since E-Cat is closed system, excluding small
opening for the hose and there is substantial steam generation. Also
it is even more impossible that steam temperature is above boiling
point of local pressure. This is very basic steam stuff, although
people seem to have huge amounts of difficulties to understand this.
This is the reason why you need to know only one measured variable
from E-Cat and that is the temperature of steam. From that you can
calculate the pressure and total amount of steam generated, since only
steam contributes for the pressure. In practice absolute value is
rather difficult (but not impossible) to calculate, but relative
output power for each demonstrations is easy, because in every
demonstration was basically the same from perspective of steam flow.
- Jouni
