Gonçal, which resolution and screen depth are you able to achieve? My first need will be to run mplayer as you have done but reproducing a video stored in a compact flash.
-----Messaggio originale----- Da: Gonçal Badenes [mailto:[EMAIL PROTECTED] Inviato: mercoledì 21 maggio 2008 10.16 A: Kim-man 'Punky' TSE Cc: Dario Finardi; [EMAIL PROTECTED] Oggetto: Re: [Voyage-linux] Alix1/3 VGA support (lxfb) Actually, I would also be interested in optimized support for the framebuffer: we are running an ALIX.1 with voyage as an IP camera monitoring station (it's in a corridor, showing the output of a remote IP camera), running mplayer on the framebuffer. The performance is actually OK without hardware optimisation, but it might be better with it ;) Cheers, Gonçal Kim-man 'Punky' TSE wrote: > Hi > > I am not convinced why a geode lx driver is needed. As far as I read > from http://wiki.laptop.org/go/Hardware_Drivers and kernel > documentation, framebuffer is for provide graphical support on kernel > console. Correct me if i am wrong. Any other strong reason than that? > Regards, > Punky > > > Dario Finardi wrote: >> I was looking for the lxfb module to have optimized support of the >> Geode framebuffer. >> I made an hand-check, then installed module-assistant too. >> I see the lxfb module ins't available in the Voyage mainstream >> distribution. >> >> Someone with a solution? >> >> >> _______________________________________________ >> Voyage-linux mailing list >> [email protected] >> http://list.voyage.hk/mailman/listinfo/voyage-linux >> > > _______________________________________________ Voyage-linux mailing list [email protected] http://list.voyage.hk/mailman/listinfo/voyage-linux
