I've seen the generic VGA driver isn't driving correctly the 24/32bit depth. Are you able to use the VESA driver?
-----Messaggio originale----- Da: Gonçal Badenes [mailto:[EMAIL PROTECTED] Inviato: mercoledì 21 maggio 2008 11.47 A: Dario Finardi Cc: Kim-man 'Punky' TSE; [EMAIL PROTECTED] Oggetto: Re: R: [Voyage-linux] Alix1/3 VGA support (lxfb) We run it at 640x480x16bits, which is basically the resolution that the IP camera gives us. However, I did some tests at higher resolutions (don't remember exactly which ones) and things were looking fine. There was a funny thing I noticed though: 24 & 32bit modes were not working properly :( Dario Finardi wrote: > Gonçal, which resolution and screen depth are you able to achieve? > > My first need will be to run mplayer as you have done but reproducing a > video stored in a compact flash. > > -----Messaggio originale----- > Da: Gonçal Badenes [mailto:[EMAIL PROTECTED] > Inviato: mercoledì 21 maggio 2008 10.16 > A: Kim-man 'Punky' TSE > Cc: Dario Finardi; [EMAIL PROTECTED] > Oggetto: Re: [Voyage-linux] Alix1/3 VGA support (lxfb) > > Actually, I would also be interested in optimized support for the > framebuffer: we are running an ALIX.1 with voyage as an IP camera > monitoring station (it's in a corridor, showing the output of a remote > IP camera), running mplayer on the framebuffer. The performance is > actually OK without hardware optimisation, but it might be better with > it ;) > > Cheers, > > Gonçal > > _______________________________________________ Voyage-linux mailing list [email protected] http://list.voyage.hk/mailman/listinfo/voyage-linux
