Hi Max,
From ifconfig, eth0 should be the network interface. It is just that
eth0 is not started or failed in getting DHCP lease?
Something a bit strange is that eth0 should use IRQ15 but I can't find
it in /proc/interrupts.
Regards,
Punky
Max Bridgewater wrote:
Hi Punky,
Attached are three documents with the result of each of these commands.
Ad Sean: curious to know which version of Voyage are you running? I've
never tried the CF because my notebook doesn't support one.
Thanks again,
Max.
On Wed, Jun 24, 2009 at 2:10 AM, Kim-man 'Punky' TSE
<[email protected] <mailto:[email protected]>> wrote:
Hi Max,
I see r6040 driver is loaded via udev. Please show me the output
of the following:
1. lspci -v
2. ifconfig -a
3. cat /proc/interrupts
- Punky
--
Regards,
Punky
Voyage Solutions (http://solution.voyage.hk)
* Embedded Solutions and Systems
- Mesh Networking, Captive Portal, IP Surveillance, VoIP/PBX
- Network Engineering, Development Platform and Consultation
_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux
