Hi Punky,
I will try the new MPD ISO image later. Here the output of lsusb:
r...@voyage:~# lsusb
Bus 001 Device 002: ID 6253:0100 TwinHan Technology Co., Ltd Ir reciver
f. remote control
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
r...@voyage:~# lsusb -v (I removed the "Linux Foundation 1.1 root
hub" output)
Bus 001 Device 002: ID 6253:0100 TwinHan Technology Co., Ltd Ir reciver
f. remote control
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x6253 TwinHan Technology Co., Ltd
idProduct 0x0100 Ir reciver f. remote control
bcdDevice 1.00
iManufacturer 1 Twinhan Tech
iProduct 2 Remote Control
iSerial 3 1111111
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 59
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 4 USB Remote Control
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 1 Keyboard
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 63
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 52
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 10
Device Status: 0x0002
(Bus Powered)
Remote Wakeup Enabled
Kind regards and many thanks for the great support
Andy
--On 12. Dezember 2010 22:09:40 +0800 Punky Tse <[email protected]>
wrote:
Hi Andy,
On 12/12/2010 20:37, Andy wrote:
c) voyage-current.iso (downloaded 2010-12-10, 57667584 bytes)
Boots fine, but USB HID keyboard IR remote control doesn't work at
all - not even as a normal usb keyboard.
uname -a:
Linux voyage 2.6.32-voyage #1 PREEMPT Wed Dec 8 04:37:31 GMT 2010
i686 GNU/Linux
For c), can you run lsusb command to show what is your USB keyboard
devices. As far as I know normal usb keyboard should work unless it
requires special HID extension, which voyage kernel may not support.
The 2.6.33rt kernel is not compiled to i486 by mistake. I am now
rebuild it now so that the newer kernel, i.e, date after Dec 8 should
support C3.
Regards,
Punky
_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux
