Hi Punky,
the new Voyage MPD kernel boots just fine. Thanks.
The Twinhan RC works mostly: The /dev/hidraw* and /dev/input/event*
device nodes are present and seem to work.
On the other hand only some keys work as a normal USB keyboard - e.g.
the number keys "0"-"9" do not work, but some special keys generate key
codes like "^@", "^[[P", "[P", "[25~" at the login prompt.
This is not a problem for me as I only need the device nodes, but I
think this is not the desired behavior.
Regards,
Andy
--On 13. Dezember 2010 02:08:28 +0800 Punky Tse <[email protected]>
wrote:
Hi Andy,
2.6.33rt kernel is rebuilt with i486 support. This should work with
C3 now. 2.6.32 and 33rt kernels are also included with TwinHan HID
support. Please test and let me know the result.
http://www.voyage.hk/dists/experimental/linux/
The daily build will need to wait for half day before the updated
kernel is included.
Regards,
Punky
On 12/12/2010 22:35, Andy wrote:
Hi Punky,
I will try the new MPD ISO image later. Here the output of lsusb:
r...@voyage:~# lsusb
Bus 001 Device 002: ID 6253:0100 TwinHan Technology Co., Ltd Ir
reciver f. remote control
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
r...@voyage:~# lsusb -v (I removed the "Linux Foundation 1.1 root
hub" output)
Bus 001 Device 002: ID 6253:0100 TwinHan Technology Co., Ltd Ir
reciver f. remote control
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x6253 TwinHan Technology Co., Ltd
idProduct 0x0100 Ir reciver f. remote control
bcdDevice 1.00
iManufacturer 1 Twinhan Tech
iProduct 2 Remote Control
iSerial 3 1111111
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 59
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 4 USB Remote Control
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 1 Keyboard
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 63
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 52
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 10
Device Status: 0x0002
(Bus Powered)
Remote Wakeup Enabled
Kind regards and many thanks for the great support
Andy
--On 12. Dezember 2010 22:09:40 +0800 Punky Tse
<[email protected]> wrote:
_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux
