Hi Punky,
ok. I am happy with the result. Thank you very much.
Just FYI: With Voyage 0.6.2 and 0.6.5 the remote control worked as a
normal USB keyboard where *every* key generated some key codes. The
number keys generated the digits 0-9 (ASCII 0x30-0x39) and the other
keys generated TAB, ENTER or some escape or control codes (what only a
few keys do with Voyage MPD).
Once again many thanks and kind regards
Andy
--On 14. Dezember 2010 11:56:04 +0800 Kim-man 'Punky' TSE
<[email protected]> wrote:
Hi Andy,
That may need some work on key mapping. Voyage Linux/MPD does not
includes one and I have no idea to it.
On 12/14/2010 5:13 AM, Andy wrote:
Hi Punky,
the new Voyage MPD kernel boots just fine. Thanks.
The Twinhan RC works mostly: The /dev/hidraw* and /dev/input/event*
device nodes are present and seem to work. On the other hand only
some keys work as a normal USB keyboard - e.g. the number keys
"0"-"9" do not work, but some special keys generate key codes like
"^@", "^[[P", "[P", "[25~" at the login prompt. This is not a
problem for me as I only need the device nodes, but I think this is
not the desired behavior.
Regards,
Andy
_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux
