Hi, I am trying to get a working AP in my alix board with a Mikrotik r52n-m minipci card (atheros ar9280 chipset using ath9k driver) using voyage 0.7
I have tried to follow this guide without success: http://www.punknix.com/dnma92-ath9k-and-hostapd-with-voyage-linux Also tried to do small modifications to the the hostapd.conf file in that guide and also tried this reduced config but couldn´t get it working interface=wlan0 driver=nl80211 ssid=yourssidhere hw_mode=g ieee80211n=1 This is my /etc/default/hostapd file: DAEMON_CONF="/etc/hostapd/hostapd.conf DAEMON_OPTS="-dd" And in my /etc/network/interfaces I have this: auto wlan0 iface wlan0 inet static address 10.5.30.1 netmask 255.255.255.0 broadcast 10.5.30.255 up nat.sh wlan0 eth0 "10.5.30.0/24" also tried to add the line "hostapd /etc/hostapd/hostapd.conf" in the wlan0 section in /etc/network/interfaces file after reading this post (without success) http://marc.info/?l=voyage-linux&m=129999678907115&w=2 My wireless card never gets the ssid. This is the output that I get from "iwconfig" command wlan0 IEEE 802.11abgn Mode:Master Frequency:2.462 GHz Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on mon.wlan0 IEEE 802.11abgn Mode:Monitor Frequency:2.462 GHz Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off ¿anyone could post a working hostapd.conf file? ¿maybe is a problem with my wireless card? ¿or with country code? ¿maybe I need to install any extra package? I am quite lost right now as I don´t know of any other place or config file to look at. I purchased this minipci card to switch to wifiN but it seems I will have to keep using my older wifiG atheros cards which worked great. many thanks for any help.
_______________________________________________ Voyage-linux mailing list [email protected] http://list.voyage.hk/mailman/listinfo/voyage-linux
