Hi Pablo,
did you set channel, e.g.:
channel=11
On 15/5/2011 19:22, Pablo Escobar wrote:
I have tried the latest voyage-current available in the web and I
still can´t get my card in ap mode
I have seen voyage-current has a /etc/hostapd/hostapd.wlan0.conf file
by default. So I edited the /etc/default/hostapd to use that config
and I keep getting the same output from iwconfig and I can´t see the
ap ssid with my client computer :(
2011/5/15 Punky Tse <[email protected] <mailto:[email protected]>>
Hi,
You may need the daily (voyage-current), which includes 2.6.38, as
9280 sounds like a device.
Regards,
Punky
On 15/5/2011 6:18, Pablo Escobar wrote:
Hi,
I am trying to get a working AP in my alix board with a Mikrotik
r52n-m minipci card (atheros ar9280 chipset using ath9k driver)
using voyage 0.7
I have tried to follow this guide without success:
http://www.punknix.com/dnma92-ath9k-and-hostapd-with-voyage-linux
Also tried to do small modifications to the the hostapd.conf file
in that guide and also tried this reduced config but couldn´t get
it working
interface=wlan0
driver=nl80211
ssid=yourssidhere
hw_mode=g
ieee80211n=1
This is my /etc/default/hostapd file:
DAEMON_CONF="/etc/hostapd/hostapd.conf
DAEMON_OPTS="-dd"
And in my /etc/network/interfaces I have this:
auto wlan0
iface wlan0 inet static
address 10.5.30.1
netmask 255.255.255.0
broadcast 10.5.30.255
up nat.sh wlan0 eth0 "10.5.30.0/24 <http://10.5.30.0/24>"
also tried to add the line "hostapd /etc/hostapd/hostapd.conf" in
the wlan0 section in /etc/network/interfaces file after reading
this post (without success)
http://marc.info/?l=voyage-linux&m=129999678907115&w=2
<http://marc.info/?l=voyage-linux&m=129999678907115&w=2>
My wireless card never gets the ssid. This is the output that I
get from "iwconfig" command
wlan0 IEEE 802.11abgn Mode:Master Frequency:2.462 GHz
Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:on
mon.wlan0 IEEE 802.11abgn Mode:Monitor Frequency:2.462 GHz
Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
¿anyone could post a working hostapd.conf file? ¿maybe is a
problem with my wireless card? ¿or with country code? ¿maybe I
need to install any extra package? I am quite lost right now as I
don´t know of any other place or config file to look at. I
purchased this minipci card to switch to wifiN but it seems I
will have to keep using my older wifiG atheros cards which worked
great.
many thanks for any help.
_______________________________________________
Voyage-linux mailing list
[email protected] <mailto:[email protected]>
http://list.voyage.hk/mailman/listinfo/voyage-linux
--
Regards,
Kim-man "Punky" Tse
* Open Source Embedded Solutions and Systems
- Voyage Linux (http://linux.voyage.hk)
- Voyage ONE (http://linux.voyage.hk/voyage-one)
- Voyage MPD (http://linux.voyage.hk/voyage-mpd)
* Voyage Store (http://store.voyage.hk)
--
Regards,
Kim-man "Punky" Tse
* Open Source Embedded Solutions and Systems
- Voyage Linux (http://linux.voyage.hk)
- Voyage ONE (http://linux.voyage.hk/voyage-one)
- Voyage MPD (http://linux.voyage.hk/voyage-mpd)
* Voyage Store (http://store.voyage.hk)
_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux
