Another way for us to troubleshoot is to send us the output of "lspci
-v" and "dmesg". And you could also change wpa=1 or wpa=2 to see if
your client computer can see the AP.
On 15/5/2011 22:29, Pablo Escobar wrote:
I have seen voyage-current has a /etc/hostapd/hostapd.wlan0.conf file
by default. So I edited the /etc/default/hostapd to use that config
and I keep getting the same output from iwconfig and I can´t see the
ap ssid with my client computer :(
--
Regards,
Kim-man "Punky" Tse
* Open Source Embedded Solutions and Systems
- Voyage Linux (http://linux.voyage.hk)
- Voyage ONE (http://linux.voyage.hk/voyage-one)
- Voyage MPD (http://linux.voyage.hk/voyage-mpd)
* Voyage Store (http://store.voyage.hk)
_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux
