I have tried the latest voyage-current available in the web and I still can´t get my card in ap mode
I have seen voyage-current has a /etc/hostapd/hostapd.wlan0.conf file by default. So I edited the /etc/default/hostapd to use that config and I keep getting the same output from iwconfig and I can´t see the ap ssid with my client computer :( 2011/5/15 Punky Tse <[email protected]> > Hi, > > You may need the daily (voyage-current), which includes 2.6.38, as 9280 > sounds like a device. > > Regards, > Punky > > > On 15/5/2011 6:18, Pablo Escobar wrote: > > Hi, > > I am trying to get a working AP in my alix board with a Mikrotik r52n-m > minipci card (atheros ar9280 chipset using ath9k driver) using voyage 0.7 > > I have tried to follow this guide without success: > http://www.punknix.com/dnma92-ath9k-and-hostapd-with-voyage-linux > > Also tried to do small modifications to the the hostapd.conf file in that > guide and also tried this reduced config but couldn´t get it working > > interface=wlan0 > driver=nl80211 > ssid=yourssidhere > hw_mode=g > ieee80211n=1 > > This is my /etc/default/hostapd file: > > DAEMON_CONF="/etc/hostapd/hostapd.conf > DAEMON_OPTS="-dd" > > And in my /etc/network/interfaces I have this: > > auto wlan0 > iface wlan0 inet static > address 10.5.30.1 > netmask 255.255.255.0 > broadcast 10.5.30.255 > up nat.sh wlan0 eth0 "10.5.30.0/24" > > also tried to add the line "hostapd /etc/hostapd/hostapd.conf" in the > wlan0 section in /etc/network/interfaces file after reading this post > (without success) > http://marc.info/?l=voyage-linux&m=129999678907115&w=2 > > My wireless card never gets the ssid. This is the output that I get from > "iwconfig" command > > > wlan0 IEEE 802.11abgn Mode:Master Frequency:2.462 GHz Tx-Power=20 > dBm > Retry long limit:7 RTS thr:off Fragment thr:off > Power Management:on > > mon.wlan0 IEEE 802.11abgn Mode:Monitor Frequency:2.462 GHz Tx-Power=20 > dBm > Retry long limit:7 RTS thr:off Fragment thr:off > Power Management:off > > > ¿anyone could post a working hostapd.conf file? ¿maybe is a problem with > my wireless card? ¿or with country code? ¿maybe I need to install any extra > package? I am quite lost right now as I don´t know of any other place or > config file to look at. I purchased this minipci card to switch to wifiN but > it seems I will have to keep using my older wifiG atheros cards which worked > great. > > many thanks for any help. > > > _______________________________________________ > Voyage-linux mailing > [email protected]http://list.voyage.hk/mailman/listinfo/voyage-linux > > > > -- > > Regards, > Kim-man "Punky" Tse > > * Open Source Embedded Solutions and Systems > - Voyage Linux (http://linux.voyage.hk) > - Voyage ONE (http://linux.voyage.hk/voyage-one) > - Voyage MPD (http://linux.voyage.hk/voyage-mpd) > * Voyage Store (http://store.voyage.hk) > >
_______________________________________________ Voyage-linux mailing list [email protected] http://list.voyage.hk/mailman/listinfo/voyage-linux
