hostapd.conf:
interface=wlan0
driver=nl80211
logger_syslog=-1
logger_syslog_level=0
logger_stdout=-1
logger_stdout_level=2
debug=4
#dump_file=/tmp/hostapd.dump
ctrl_interface=/var/run/hostapd.wlan0
ctrl_interface_group=0
channel=6
hw_mode=g
macaddr_acl=0
auth_algs=3
eapol_key_index_workaround=0
eap_server=0
wpa=3
#ssid=voyage-mpd
ssid=xxxxx
wpa_passphrase=xyz
#wpa_passphrase=voyage-mpd
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP
rsn_pairwise=CCMP
#eapol_version=1
#wme_enabled=1
#ieee80211n=1
#ht_capab=[HT40-][HT40+][SHORT-GI-40][TX-STBC][RX-STBC1][DSSS_CCK-40]
country_code=DE
board: pcengines.ch APU
card: http://pcengines.ch/pdf/wle200nx.pdf
Punky Tse <punky...@punknix.com> schrieb am 16:18 Sonntag, 8.Juni 2014:
On 6/8/2014 2:05 AM, babajaga wrote:
> During update/upgrade I got a new version of hostapd from the repo. And I got
> these segfaults after boot:
> https://bbs.archlinux.org/viewtopic.php?id=176814
Can you post your hostapd.conf, what is your wirelesss cards and run on
which board? Thanks.
> Might be good idea to remove 2.1.
Or move forward?
--
Regards,
Kim-man "Punky" Tse
* Open Source Embedded Solutions and Systems
- Voyage Linux (http://linux.voyage.hk)
- Voyage MPD (http://linux.voyage.hk/voyage-mpd)
- Voyage MuBox (http://mubox.voyage.hk)
* Voyage Store (http://store.voyage.hk
)
_______________________________________________
Voyage-linux mailing list
Voyage-linux@list.voyage.hk
http://list.voyage.hk/mailman/listinfo/voyage-linux
